Operation Manual

2-19
COPIER►BASIC PROCEDURE FOR MAKING COPIES
4
Check the paper (tray) and color mode
you want to use for copying, and tap
the keys for any other settings you
want to select.
Tap the [Original] key and specify the orientation of the
original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-33)
• Paper Select ►page 2-13
• Copy Ratio ►page 2-26
• Staple / Punch ►page 2-42, ►page 2-45
• Color Mode ►page 2-20
•Original ►page 2-33
• Exposure ►page 2-23
•N-Up ►page 2-49
• Card Shot ►page 2-52
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper tray manually.
5
Tap the [Preview] key.
6
Tap the [Color Start] or [B/W Start] key.
7
Set the next original, and tap the
[Color Start] or [B/W Start] key to scan
the original.
Tap the same key you tapped in step 5.
Repeat this step until all originals have been scanned.
8
Tap the [Read-End] key to start copying.
Original
Detail
Staple / PunchCopy Ratio2-Sided Copy
Paper
Select
Tray 1 1 → 1
100% Off
Preview
B/W
Start
Color
Start
Copies
CA
8½x11
8½x11
Staple / Punch
Paper
Select
A4
Tray 1
Off
Copies
Read-End
Place next original. Press [Start].
When finished, press [Read-End].
B/W
Start
Color
Start
CA
Original
A4
Detail