Operation Manual

4-4
FACSIMILE►BEFORE USING THE MACHINE AS A FAX
BEFORE USING THE MACHINE AS A FAX
To use the machine as a facsimile, connect the telephone line, and set the telephone line type.
BEFORE USING THE MACHINE AS A FAX
The facsimile expansion kit is required in order to make use of fax functionality.
1
Connecting to the telephone line.
Insert the plug on one end of the telephone line cord into the telephone line jack (LINE) of the machine as shown, and
insert the other plug into a wall telephone jack.
* Be sure to use the attached telephone line cord.
If the connection cable is not properly connected, "Sending has failed. Please check network connection." will appear
when you attempt to send a fax. Properly connect the connection cable.
2
Make sure the main power switch is in the " " position.
When the main power indicator is lit up, the main power is in the " " position. If the main power indicator is not lit up,
turn the main power switch to the " " position and press the [POWER] button on the operation panel.
*If the fax function will be used, and in particular if reception or timer transmission will take place at night, always keep
the main power switch in the " " position.
Clicks
Telephone line jack (Line)
Clicks
Main power indicator [Power] button
Main power switch