Operation Manual

4-44
FACSIMILE►BASIC TRANSMISSION METHODS
AUTO DETECTION
When the original is placed, its size is automatically detected.
In normal mode, the size of the placed original is shown as the "Scan Size" and the transmission size is shown as the
"Send Size" in the initial screen.
In the above screen, the scan size (the placed original) is 8-1/2" x 11" (A4) and the send size is auto. For example, if the
scan size is 8-1/2" x 11" (A4) and the send size is 5-1/2" x 8-1/2" (B5), the image will be reduced before transmission.
• Only standard original sizes can be automatically detected.
► Standard sizes (page 2-11)
• When the original size is an inch size or a non-standard size, or if the size is not detected correctly, manually specify the
original scan size.
► SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE (page 4-45)
► SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES (page 4-46)
Exposure
Address Book
Original
Resolution
Job Build
Original Count
Slow Scan Mode
Others
Address Fax Number
Sending History
Call Search Number
Call Program
Call Registered settings
Direct TX
Verification Stamp
Send Same Image
as Fax Address
Scan Size
Auto Auto
reception memory
100%
100%
Send Size
Speaker
Start
CA
Preview
Mixed Size Orig.
Auto
Super Fine
8½x11 8½x11
"Scan Size"
A4
"Send Size" is set
to 5-1/2" x 8-1/2"
(B5)
Send
The image is reduced
to 5-1/2" x 2-1/2" (B5)
before transmission