Operation Manual

5-63
SCANNER/INTERNET FAXTRANSMITTING AN IMAGE
SETTING SCAN SETTINGS AUTOMATICALLY
(Auto Set) (MX-3070N/MX-3570N/MX-4070N/MX-5070N/
MX-6070N only)
To automatically set scan settings appropriate for the original, tap the [Auto Set] key in the base screen of Easy Mode.
The following functions are set automatically.
• Image Orientation
• Resolution
• Blank Page Skip
Each function setting value/parameter can be changed in setting mode.
CHECKING THE IMAGE TO BE
TRANSMITTED
Check the image that will be sent in the touch panel before transmission.
You can tap the [Preview] key to check a preview of the image before sending an image. As you can adjust the exposure
and resolution to scan the original while checking it in the preview screen, you can send a better quality original to the
destination.
When "Auto Set" is enabled, grayed out functions cannot be enabled.
When an Internet Fax address is selected, "Auto Set" cannot be enabled.
To change the "Auto Set" setting, use "Settings (administrator)" - [System Settings] [Image Send Settings]
[Scan Settings] [Condition Settings] [Auto Scan Setting].
Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the touch panel.
The preview function is not available when the original size is set to Long Size.
CA
Preview
Original
Address E-mail Address
Detail
Start
Color
Start
Original
2-Sided Auto
PDF
PDF
Auto
Resolution File Format
Blank Page
Skip
Auto Set
B/W
8½x11