Operation Manual

1-63
BEFORE USING THE MACHINE►LOADING PAPER
Types of paper that can be set in each tray
*1 when a low stand/550 sheet paper drawer or stand/550/2x550/3x550/550&2100 sheet paper drawer is installed
*2 when a stand/2x550/3x550 sheet paper drawer is installed
*3 when a stand/3x550 sheet paper drawer is installed
*4 when a stand/550&2100 sheet paper drawer is installed
*5 when a large capacity tray is installed
*6 "Heavy Paper 1" is heavy paper up to 65 lbs. cover (176 g/m
2
), "Heavy Paper 2" is heavy paper up to 80 lbs. cover
(220 g/m
2
), "Heavy Paper 3" is heavy paper up to 140 lbs. index (256 g/m
2
), and "Heavy Paper 4" is heavy paper
up to 110 lbs. cover (300 g/m
2
).
• For detailed information on the sizes and types of paper that can be loaded into each tray of the machine, see
"SPECIFICATIONS" in the "Start Guide" and "Paper Tray Settings (page 7-119)
".
• Recycled paper, colored paper and pre-punched paper must meet the same specifications as plain paper.
Before using any paper, consult the dealer or nearest SHARP Service Department.
Tray 1 Tray 2
*1
Tray 3
*2
Tray 4
*3
Tray 3
Tray 4
*4
Tray 5
*5
Bypass tray
Plain Paper Permitted Permitted Permitted Permitted Permitted
Heavy Paper 1*
6
Permitted Permitted - Permitted Permitted
Heavy Paper 2*
6
Permitted Permitted - Permitted Permitted
Heavy Paper 3*
6
Permitted Permitted - - Permitted
Heavy Paper 4*
6
Permitted Permitted - - Permitted
Embossed - - - - Permitted
Thin Paper - - - - Permitted
Pre-Printed Permitted Permitted Permitted Permitted Permitted
Recycle Paper Permitted Permitted Permitted Permitted Permitted
Letter Head Permitted Permitted Permitted Permitted Permitted
Pre-Punched Permitted Permitted Permitted Permitted Permitted
Color Permitted Permitted Permitted Permitted Permitted
Labels - - - - Permitted
Glossy Paper - - - - Permitted
Transparency - - - - Permitted
Tab Paper - - - - Permitted
Envelope - - - - Permitted