Operation Manual

7-104
SYSTEM SETTINGS►SYSTEM SETTINGS
Transaction Report Print Select Setting
Selects whether or not a transaction report will be printed, and if printed, the condition for being printed. Select a setting
for each of the following operations:
Single Sending
• Always Print
• Print Out Error Report Only
• Do not Print
Broadcasting
• Always Print
• Print Out Error Report Only
• Do not Print
Receiving
• Always Print
• Print at Error
• Do not Print
When a transaction report is printed, this is used to print part of the first page of the transmitted original on the
transaction report. For more information, see "Original Print on Transaction Report (page 7-103)
".
Activity Report Print Select Setting
Prints the Image Sending Activity Report stored in the machine memory periodically.
The Image Sending Activity Report can be set to print each time the number of transactions reaches 200, or at a
specified time (once a day only). (The settings can be simultaneously enabled.)
Body Text Print Select Setting
Image files attached to Internet faxes are normally printed. This setting can be enabled to also have the e-mail body text
(subject and message) printed.
This setting also applies to printing of the body text of e-mail messages without file attachments.
Send Setting
These settings are used to configure the settings for Internet fax.
I-Fax Reception Report On/Off Setting
This setting is used to request a reception report when an Internet fax is sent.
I-Fax Reception Report Request Timeout Setting
The duration of time that the machine will wait for a reception report from the destination machine can be set by any
number from 1 hour to 240 hours in increments of 1 minute.
• If you only select the "Print Daily at Designated Time" setting and the number of recorded transactions reaches 200
before the specified time, each new transaction will delete the oldest transaction (the oldest transaction will not be printed).
• The Transaction Report can be printed out manually as needed.
See "List for Administrator (page 7-53)
" .
A maximum of 5 pages of body text can be printed.
This setting is only effective when "I-Fax Reception Report On/Off Setting (page 7-104)" is enabled.