Service manual

MX-LCX2 DISASSEMBLY AND ASSEMBLY 6 – 3
B. Lift motor
1) Remove the drive unit.
2) Remove the E-ring, and remove the parts.
3) Remove the screw, and remove the cover.
4) Remove the screw, and remove the lift motor.
5) Remove the ring, and remove the pulley.
C. Clutch
1) Remove the paper feed unit. (Refer to "3. Each unit removal.")
2) Remove the screw, and remove the cover.
3) Remove the E-ring, and remove the parts.
4) Disconnect the connector, and remove the screw.
5) Remove the frame.