Service manual

MX-LCX2 DISASSEMBLY AND ASSEMBLY 6 – 4
6) Remove the connector, and the E-ring, and remove the paper
feed, transport clutch, respectively.
D. Paper feed solenoid
1) Remove the paper feed unit.
2) Remove the cover.
3) Remove the screw, and remove the unit.
4) Disconnect the connector.
5) Remove the screw, and remove the solenoid.
E. Torque limiter
1) Remove the paper feed unit.
2) Remove the cover.
3) Remove the E-ring and the screw, and remove the parts.
4) Lift the shaft, and remove the torque limiter.