Service manual
MX-LCX2 ADJUSTMENTS 8 – 2
<<Description of items>>
ADJ 2 Resist amount adjustment
2-A Changing resist amount adjustment/
deflection amount correction value
1) Execute SIM.51-2 by the key operation of the machine. Then,
the displays shown on the right side appear.
2) Select the [ENGIN] button.
3) Press the [↓] key on the touch panel to select “U:50:A4LCC”.
4) Then, enter your desired adjustment value with the [10] key.
(Default: 50 Ajustment range: from 1 to 99)
* As the adjustment value is increased, the deflection amount
is also increased. As the adjustment value is decreased, the
deflection amount is also decreased.
(If the adjustment value is changed by “1”, the stop timing is
changed by 0.1mm (1.0msec).)
5) After the adjustment value is entered, press the [OK] key on
the touch panel to save the set value.
6) After the adjustment is finished, escape from the simulation
mode with the reset key.
Item Display item and details Descriptions Setting range Default Writing
A BK-MAG Main scanning print magnification BK 60 to 140 100 Yes
B MFT Print off-center adjustment value (manual) 1 to 99 50 Yes
C CS1
Print off-center adjustment value
(cassette 1)
1 to 99 50 Yes
D CS2 Print off-center adjustment value (cassette 2) 1 to 99 50 Yes
E CS3 Print off-center adjustment value (cassette 3) 1 to 99 50 Yes
F CS4 Print off-center adjustment value (cassette 4) 1 to 99 50 Yes
G LCC Print off-center adjustment value (LCC) 1 to 99 50 Yes
H ADU Print off-center adjustment value (ADU) 1 to 99 50 Yes
I MULTI COUNT Number of printed sheets 1 to 999 1 No
J PAPER MFT Cassette selection Manual 1 to 6 1 2
(CS1)
No
CS1 Cassette 1 2
CS2 Cassette 2 3
CS3 Cassette 3 4
CS4 Cassette 4 5
LCC LCC 6
K DUPLEX YES Double sided print selection Select 0 to 1 0 1(NO) No
NO Not select 1
[Switching of screen]
SIMULATION NO51-02
SIMULATION NO51-02
OK
㪈㪇
Key
0
U:
REGIST ROLLER ADJUSTMENT
50
㨇㨉
O
K
TEST
CLOSE
REGI1
REGI2 ENGIN
0
U:
REGIST ROLLER ADJUSTMENT
60
㨇㨉
O
K
TEST
CLOSE
REGI1
REGI2 ENGIN
N: 50 ; MANUAL HEAVY PAPER1(L)
O: 50 ; MANUAL OHP1
P: 50 ; MANUAL ENV
Q: 50 ; ADU PLAIN PAPER(S)
R: 50 ; ADU PLAIN PAPER(L)
S: 50 ; ADU HEAVY PAPER1(S)
T: 50 ; ADU HEAVY PAPER1(L)
U: 50 ; A4LCC
V: 50 ; A3LCC(S)
W: 50 ; A3LCC(L)
X: 50 ; A3LCC HEAVY PAPER‚P(S)
Y: 50 ; A3LCC HEAVY PAPER‚P(L)
N: 50 ; MANUAL HEAVY PAPER1(L)
O: 50 ; MANUAL OHP1
P: 50 ; MANUAL ENV
Q: 50 ; ADU PLAIN PAPER(S)
R: 50 ; ADU PLAIN PAPER(L)
S: 50 ; ADU HEAVY PAPER1(S)
T: 50 ; ADU HEAVY PAPER1(L)
U: 60 ; A4LCC
V: 50 ; A3LCC(S)
W: 50 ; A3LCC(L)
X: 50 ; A3LCC HEAVY PAPER‚P(S)
Y: 50 ; A3LCC HEAVY PAPER‚P(L)