Service manual

MX-LCX2 SIMULATION 9 – 1
MX-LCX2
Service Manual
[9] SIMULATION
1. List
2. Details of trouble code
4
4-2
Purpose
Operation test/Check
Function (Purpose)
Used to check the operations of the sen-
sors and detectors in the large capacity tray
(LCC) and the control circuit.
Section
Large capacity tray (LCC)
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
Sensors and detectors which are turned on are highlighted.
4-3
Purpose
Operation test/Check
Function (Purpose)
Used to check the operations of the loads
in the large capacity tray (LCC) and the
control circuit.
Section
Large capacity tray (LCC)
Operation/Procedure
1) Select a target of the operation check with the touch panel.
2) Press [EXECUTE] key.
The selected load is operated.
When [EXECUTE] is pressed, the operation is stopped.
Code
Function (purpose) Purpose Section
Main Sub
4
2
Used to check the operations of the sensors and detectors in the large capacity tray
(LCC) and the control circuit.
Operation test/Check
Large capacity tray
(LCC)
3
Used to check the operations of the loads in the large capacity tray (LCC) and the
control circuit.
Operation test/Check
Large capacity tray
(LCC)
5 Used to check the operations of the clutch (LTRC) in the LCC and the monitor. Operation test/Check
Large capacity tray
(LCC)
15 - Used to cancel the self-diag "U6-09 (large capacity paper feed tray)" trouble.
Clear/cancel (Trouble
etc.)
LCC
<MX-LCX2>
LPFD LCC transport sensor
LUD LCC tray upper limit detection
LDD LCC tray lower limit detection
LPED LCC tray paper empty detection
LCD LCC tray insertion detection
LDSW LCC upper open/close detection SW
LRE LCC lift motor encoder detection
L24VM LCC 24V power monitor
LLSW LCC upper limit SW
LTOD LCC main unit connection detection
LCC SENSOR CHECK
CLOSE
SIMULATION NO.04-02
TEST
1/1
LPFD
LUD LDD LPED
LCD
LDSW LRE L24VM
LLSW
LTOD
<MX-LCX2>
LPFM LCC transport motor
LLM LCC lift motor
LPFC LCC paper feed clutch
LPFS LCC paper feed solenoid
LTRC LCC transport clutch
SIMULATION NO.04-03
TEST
LCC LOAD CHECK
EXECUTE
1/1
CLOSE
LPFM
LLM
LPFC
LPFS
LTRC