Operation Manual

Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. Connecting Other
Devices
6. Operating the Monitor
Using a PC (IP control)
1. Connecting the Monitor
and PC
3. Settings to operate the
Monitor
4. Command list
7. Troubleshooting
8. Specifications, etc.
You can select a language.
English >>
Français >>
Español >>
Deutsch >>
Ver. 1.00
＞
＜
Operating the Monitor Using a PC (IP control)
How to communicat
e
• Send a control command from PC.The
Monitor operates according to the
transmitted command, and sends a response
message back to PC.
• Do not send more than one command at the
same time.Send next command from PC
after it receives the successful return value
(OK).
Command (PC to Monitor)
Response (Monitor to PC)
When successful When unsuccessful (in the event of
a communication or command
error)
Connecting the Monitor and PC
• The Monitor is connected using a commercially available LAN cable.
NOTE
• When you use a network, your communication data is exposed to the risks of being stolen or illegally accessed.
To avoid these risks, you need to use this monitor in a secure network environment.
6-1
5/27/2020 Sharp operation manual