Operation Manual

Contents
1. Part Names
2. Basic Operation
3. Menu Operation
1. How to Use Menu
2. How to Use Setup Menu
3. List of Setup Menu
Items
44. How to Use Application
Menu
45. Entering Letters
(Software Keyboard)
4. USB Media
5. Connecting Other
Devices
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
8. Specifications, etc.
You can select a language.
English >>
Français >>
Español >>
D
eutsc
h >
>
＞
＜
Menu Operation
List of Setup Menu Items
CEC setup
Menu item name Setup
CEC control On, Off
Set it to "Off" if the power supply is turned on or the channel changes
automatically when connecting a device that is not HDMI CEC enabled.
Auto power on Yes, No Set it to turn on automatically once an HDMI CEC-enable device is operated.
Selecting
channel
key
INPUT1 Auto, On, Off
When you set "Selecting channel key" to "On", you can perform HDMI CEC-
enabled tuner built-in device operation with the remote control.(page 5-13)
For "Auto", a device operates in the same manner as it does when this is set
to "Off". Only when there is a request from a connected device however, it
will operate in the same manner as it would when this is set to "On".
INPUT2 Auto, On, Off
INPUT3 Auto, On, Off
INPUT4 Auto, On, Off
INPUT7 Auto, On, Off
INPUT8 Auto, On, Off
Audio return channel Auto, Off
"ARC (Audio Return Channel)" is the function to transmit sound from the
monitor to the AV amplifier, etc. using an HDMI cable. If you set "Audio
return channel" to "Auto", you can connect to an ARC compatible audio
device with a HDMI cable. This function is available only when it is connected
to INPUT 2 terminal.
You can also setup from the Application menu (page 3-44)
3-31
5/27/2020 Sharp operation manual