Operation Manual

Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
1. Before Using USB
Media
7. Enjoying Photo
21. Enjoying Music
24. Enjoying Video
5. Connecting Other
Devices
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
8. Specifications, etc.
You can select a language.
English >>
Français >>
Español >>
Deutsch >>
Ver. 1.00
＞
＜
USB Media
Enjoying Photo
Copying photo
About this function
• Copying a photo from USB memory to another memory.
• When copying a photo to an SD memory card, a USB card reader is needed.
• Attach the USB memory to be used for copying to the Monitor in advance.
• Specify the copy destination by using the Setup menu, and then use USB Media to perform copy operation.
To copy photos, more than one USB memories need to be connected. However, only one connection is
allowed when setting the USB memory destination.
Specify the destination to copy the photo
1. Make sure that only one USB memory is attached to the Monitor.
2. Press MENU to display the Menu, press / / / to select "Setup", and then press ENTER
3. Press / / / to select " (Initial Setup)" - "Individual setting" - "USB memory setting", and then press
ENTER
4. Press / button to select "Select USB memory", and then press ENTER
5. Press / button to select "Yes", and then press ENTER
• For information on copy operation, see page 4-17.
4-16
5/27/2020 Sharp operation manual