Operation Manual

Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
1. Before Using USB
Media
7. Enjoying Photo
21. Enjoying Music
24. Enjoying Video
5. Connecting Other
Devices
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
8. Specifications, etc.
You can select a language.
English >>
Français >>
Español >>
Deutsch >>
Ver. 1.00
＞
＜
USB Media
Enjoying Photo
To remove the USB memory that is used as the copy destination
How to operate
1. Press MENU to display the Menu, press / / / to select "Setup", and then press ENTER
2. Press / / / to select " (Initial Setup)" - "Individual setting" - "USB memory setting", and then press
ENTER
3. Press / to select "Remove selected USB memory", and then press ENTER
4. Press ENTER
5. Press ENTER
6. Remove USB memory
NOTE
• Even after selecting "Remove selected USB memory", data in the USB memory can still be viewed through
"USB Media" until the USB memory is physically removed.
• After selecting "Remove selected USB memory", the copy / delete function will not be available. To enable the
copy / delete function, remove and reconnect the USB memory physically. (will be automatically specified again)
4-19
5/27/2020 Sharp operation manual