C400 Operation-Manual Maintenance-Safety-Guide GB

REPLACING SUPPLIES AND MAINTENANCE

Close the front cover.

• After the toner cartridge is replaced, the machine automatically enters

image adjustment mode. Image adjustment will not take place if the

cover is not closed.

• Take care that your fingers are not pinched when closing the cover.

Caution

• Do not throw a toner cartridge into a fire. Toner may fly and cause burns.

• Store toner cartridges out of the reach of small children.

• Store the box that contains the toner cartridge horizontally; do not store it

standing up. If the toner cartridge is stored standing up, the toner may solidify

inside the cartridge.

Store the toner in a location that is cooler than 40°C (104°F). Storage in a hot

location may cause the toner in the cartridge to solidify.

• If a toner cartridge other than a SHARP-recommended toner cartridge is

used, the machine may not attain full quality and performance and there is a

risk of damage to the machine. Be sure to use a SHARP-recommended

toner cartridge.

• Keep the used toner cartridge in a plastic bag (do not discard it). Your service

technician will collect the used toner cartridge.

• To view the approximate amount of

toner remaining, continually touch

the [COPY] key during printing or

when the machine is idle. The

percentage of toner remaining will

appear in the display while the key

is touched. When the percentage

falls to "25-0%", obtain a new toner

cartridge and keep it ready for replacement. When the remaining toner falls

to "25-0%", colours in the output may be faint or partially missing when an

original or image with dark colours is copied or printed.

Total Count B/W:00,000,000

Full Colour:00,000,000

2-colour:00,000,000

Single colour:00,000,000

Toner Quantity [Bk]:100-75%

[C]:100-75%

[M]:100-75%

[Y]:100-75%