C400 Operation-Manual Maintenance-Safety-Guide GB

REPLACING SUPPLIES AND MAINTENANCE

Remove the developer cartridge.

(1) Grasp the developer cartridge lock and pull it forward

and down.

(2) Squeeze the lever on the developer cartridge.

(3) Pull the developer cartridge out horizontally.

(4) Support the developer cartridge near the middle with

your hand and completely remove the developer

cartridge.

• When removing the developer cartridge, grasp it with both hands at

the middle.

• Try to keep the developer cartridge horizontal as you remove it. If

tipped during removal, developer may spill out.

• There will be toner on the roller area of the removed developer

cartridge. Do not touch the roller area. If you accidentally touch the

toner, immediately wash your hands.

(2) (2)

(3)

Roller