C400 Operation-Manual Maintenance-Safety-Guide GB

REPLACING SUPPLIES AND MAINTENANCE

Shake the new developer cartridge 5 or 6 times as

shown.

Hold the developer cartridge firmly as shown below and shake forward and

back, left and right.

Remove the protective material after shaking the developer cartridge.

• The part of the developer cartridge

shown in the next illustration is easily

deformed or damaged. Do not touch

this part when handling the cartridge.

• Do not touch the roller in the

developer cartridge. If the roller is

accidentally touched, image

problems may result. In that case,

replace the developer cartridge with a new cartridge.

• The seal must not be removed when

shaking the new developer cartridge.

• Take care not to damage the developer

cartridge when shaking it. If damaged,

the developer in the cartridge may leak

out.

Protective

material