MX-C310/C311/C380/C381/C400 Operation-Manual Maintenance-Safety-Guide GB

65
SPECIFICATIONS
Printer specifications
*1 When the machine is used as a PostScript printer. (When MX-C310/MX-C380/
MX-C400 are used, the PS3 expansion kit is required.)
*2 When the XPS expansion kit is installed.
*3 Barcode font kit is required.
*4 Supported operating systems are Windows 2000 / Server 2003 / XP / Vista /
Server 2008.
*5 To install the XPS expansion kit, an expansion memory board is required.
Type
Built-in
Continuous
printing speed
Same as continuous copying speed (When printing same
document continuously on A4 (8-1/2" x 11") plain paper in
non-offset mode, excluding processing time.)
Printing
resolution
600 x 600 dpi / 1200 x 1200 dpi
Printer driver
type
PCL5c, PCL6, PostScript 3 compatible*
1
, XPS*
2
Supported
protocols
TCP/IP, IPX/SPX, NetBEUI, EtherTalk
Supported client
PC operating
systems
See "VERIFYING SYSTEM REQUIREMENTS" in the Software
Setup Guide.
Fonts
PCL5c, PCL6
80 European fonts, 28 barcode fonts*
3
, 1
bitmap font
PostScript 3
compatible*
1
136 European fonts
Interface port
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Supports USB 2.0 (Hi speed)*
4
Memory
Standard system
memory
MX-C310/MX-C311: 512 MB
MX-C380/MX-C381/MX-C400: 1 GB
Expansion memory 1 GB*
5
Print area
Entire page excluding margin of 4.2 mm (11/64") at each edge.
The actual print area may vary depending on the printer driver and
the software application.