Operation Manual, User's Manual

1-12
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
TURNING ON THE POWER
This section describes how to turn on/off the machine's power and how to restart the machine.
Operate two power switches: the main power switch inside the front cover, located in the lower left corner, and the
[Power] button on the operation panel.
Turning on the power
• Turn the main power switch to the " " position.
• When the main power indicator lights in green, press the [Power] button.
Turning off the power
Turn off the power by pressing the [Power] button, then turn the main power switch to the " " position.
Restart the machine
Turn off the power by pressing the [Power] button and then press it again to turn on the power.
When a finisher (large stacker) or saddle stitch finisher (large stacker) is installed on the MX-5051/MX-5071/MX-5071S/
MX-6051/MX-6071/MX-6071S, open the front cover on the finisher (large stacker), or the front upper cover on the saddle
stitch finisher (large stacker), before opening the front cover of the machine.
• When turning off the main power switch, press the [Power] button on the operation panel and then turn the main power
switch to the " " position.
In a sudden case of main power outage, turn the power for the machine back on and then turn it off in the correct order.
If the machine is left for a long time with the main power having been turned off prior to the [Power] button being turned off,
abnormal noises, degraded image quality or other problems may result.
• Turn off both the [Power] button and the main power switch and unplug the power cord if you suspect a machine failure, if
there is a bad thunderstorm nearby, or when you are moving the machine.
• If the fax function will be used, and in particular if reception or timer transmission will take place at night, do not turn the
main power off.
• When using the fax or Internet fax function, always keep the main power switch in the " " position.
• In order for some settings to take effect, the machine must be restarted. In some states of the machine, restarting with the
[Power] button may not make the settings take effect. In this case, turn off the main power switch and then turn it on again.
Main power indicator [Power] button
The main power switch