Operation Manual, User's Manual

2-97
COPIER►OTHER FUNCTIONS
• High Quality Scan from Document Feeder (B/W)
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [High Quality Scan from
Document Feeder]. The resolution for copying in black and white using the automatic document feeder can be changed
from 600 x 400 dpi to 600 x 600 dpi (high quality mode). When high quality mode is used, fine print and thin lines are
reproduced with greater clarity, however, the scanning speed is slower. When high quality mode is not selected, the
following conditions must be satisfied in order to scan at 600 x 400 dpi and attain the fastest speed.
• The copy ratio must be set to 100%.
• Do not select a special mode that will change the ratio.
• [Copy of Copy] must not be enabled.
• Do not copy in black and white with the [Colour Start] key.
• Quick Scan from Document Glass (B/W)
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Quick Scan from Document Glass].
The resolution for copying in black and white using the document glass can be changed from 600 x 600 dpi to 600 x 400 dpi (high speed
mode). When high speed mode is selected, the first copy time is quicker, however, the copy image is not as clear. When high quality
mode is not selected, the following conditions must be satisfied in order to scan at 600 x 400 dpi and attain the fastest speed.
• The copy ratio must be set to 100%.
• Do not select a special mode that will change the ratio.
• [Copy of Copy] must not be enabled.
• Do not copy in black and white with the [Colour Start] key.