Operation Manual, User's Manual

7-30
SETTING MODE►SETTING MODE LIST
*1 Appears when [LDAP] is set in "Authentication Settings".
*2 Disappears when "Settings (administrator)" - [Sharp OSA Settings] → [External Accounting Application Settings] →[Set
Authentication Server (Server 1)] is enabled.
*3 This setting is configured in setting mode on the machine.
Allow Remote Scanner Using Before Login. Disabled No Yes
1-52
Include Job Status in user authentication Disabled No Yes
Enable IPP Authentication Except for Printer Driver Enabled No Yes
Actions when the user is authenticated No Yes
Actions when the Limit of Pages for Output Jobs
*2
Job is Completed even
when the Limit of
Pages is Reached
No Yes
Cancel and delete the job during receiving No Yes
Automatically print stored jobs after login Disabled No Yes
Reset the counter after sending E-mail status Disabled No Yes
Disable display/change of other users' information in
the job status
No Yes
Screen Display Settings after the authentication No Yes
Apply login name to the user name of network folder No Yes
Login Name Display Display login name No Yes
Display Usage Status after Login Disabled No Yes
Edit Help Display of Login Screen No Yes
Card Reader Settings No Yes
1-53
Importing from the setup file No Yes
Card Scan Test No Yes
Card Type / Card Reader 200(HID Card) No Yes
Check System Code only in FeliCa User Area mode Disabled No Yes
Card ID Registration/Change Authority Disabled No Yes
SSFC Card Setting No Yes
Check Facility Code in HID mode Disabled No Yes
Importing from the setup file No Yes
Setup Items
Factory default setting
U A Page