Operation Manual, User's Manual

2-51
COPIER►BASIC PROCEDURE FOR MAKING COPIES
REPEATING THE SAME IMAGE ON ONE SHEET
(REPEAT LAYOUT)
This function copies multiple same original images on one sheet.
You can set any of the following three types of repeat copy.
Repeat method Description
Auto Repeat
The maximum repeat count to copy images on a sheet is calculated automatically according
to the original size, paper size, and copy ratio being selected from the base screen.
Fixed Repeat
When you select a repeat count, original size, and paper size to copy images on a sheet, the
copy ratio is calculated automatically and the original is copied.
Photo Repeat
This function repeatedly copies on A4 (8-1/2" x 11") or A3 (11" x 17") papers without changing
the copy ratio of the photo size original. You can select any of the following five types of
original size:
E/L Size, Postcard (Up to 148 mm x 105 mm (3" x 5"))
Up to 100 mm x 150 mm (5" x 7")
Card (Up to 70 mm x 100 mm (2-1/2" x 4"))
ID Photo (Up to 65 mm x 70 mm (2-1/2" x 2-1/2"))
Card (Up to 57 mm x 100 mm (2-1/8" x 2-5/8"))
* Reduction will be 95%.
Repeat Layout must be specified before scanning the original.
If the copy ratio automatically obtained in [Fixed Repeat] exceeds 25 to 400% (using document glass) or 25 to 200%
(using automatic document feeder), it will result in an error. Select the number of faces to repeat again.
Always place an original on the document glass for photo repeating.
Repeat Layout can be combined with Staple / Punch or Saddle Stitch.
This function cannot be combined with Mixed Size Original or 2-Sided Copy.
Photo Repeat cannot be combined with Image Orientation.