Operation Manual, User's Manual

2-131
COPIER►CONVENIENT COPY FUNCTIONS
PROGRAMS
Programs are set from the base screen of normal mode.
► SELECTING COPY MODE (page 2-4)
STORING A PROGRAM
This function collectively stores copy settings as one program. The stored program can be retrieved using an easy
operation.
For information about how to retrieve a program, see "RETRIEVING A PROGRAM
(page 2-133)".
For example, suppose A3 (11" x 17") size CAD drawings are copied once a month for archive purposes using the
following settings:
• The A3 (11" x 17") size CAD drawings are reduced to A4 (8-1/2" x 11") size.
• To reduce paper use by half, 2-sided copying is used.
• Margin shift is used to allow a margin to punch holes for filing.
Programs cannot be stored in easy mode.
Disabling of Registration/Deletion of Program
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Disabling of
Registration/Deletion of Program].
This is used to prohibit the deletion and change of copy settings stored in job programs.
When a job program is not stored When a job program is stored
Set reduction from A3 (11" x 17") to A4 (8-1/2" x 11")
Change the exposure setting.
Set 2-sided copying.
Set margins.
Set punch hole settings.
Tap the [Start] key.
Retrieve the stored program.
Tap the [Start] key.
A3 (11" x 17") size CAD drawings
Copy