Operation Manual, User's Manual

4-45
FACSIMILE►BASIC TRANSMISSION METHODS
AUTO DETECTION
When the original is placed, its size is automatically detected.
In normal mode, the size of the placed original is shown as the "Scan Size" and the transmission size is shown as the
"Send Size" in the initial screen.
In the above screen, the scan size (the placed original) is A4 (8-1/2" x 11") and the send size is auto. For example, if the
scan size is A4 (8-1/2" x 11") and the send size is B5 (5-1/2" x 8-1/2"), the image will be reduced before transmission.
• Only standard original sizes can be automatically detected.
► Standard sizes
(page 2-10)
• When the original size is an inch size or a non-standard size, or if the size is not detected correctly, manually specify the
original scan size.
► SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE
(page 4-46)
► SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES (page 4-47)
Exposure
Auto
Original
Mixed Size Orig.
Resolution
Super Fine
Job Build
Original Count
Slow Scan Mode
Others
Address Fax Number
Sending History
Call Search Number
Call Program
Call Registered settings
Direct TX
Verification Stamp
Send Same Image
as Fax Address
Scan Size
Auto Auto
reception memory
A4 A4
100%
Send Size
Speaker
Start
CA
Preview
100%
Address Book
"Scan Size"
A4 (8-1/2" x 11")
"Send Size" is set to
B5 (5-1/2" x 8-1/2")
Send
The image is reduced
to B5 (5-1/2" x 2-1/2")
before transmission