Datasheet MXM1206 GB

Options
Base Unit
MX-KB18 Keyboard
MX-SL10N Status Indicator lamp
1. MX-MFX1 Multi Bypass Tray (for main machine)
A5R-A3W, 100 sheets (80 g/m2) Can be end of configuration.
2. MX-LC12 Large Capacity Tray (A4)
A4-B5, 3,500 sheets (80 g/m2)
Requires MX-MFX1. Cannot be installed with MX-LC13N or MX-LCX3 N.
3. MX-LC13 N Large Capacity Trays (A3)
Requires MX-MF11. Cannot be installed with MX-LC12 or MX-MFX1.
4. MX-LC13 N Large Capacity Trays (A3)
Requires MX-RB17 Connection Module.
Cannot be installed with MX-LC12 or MX-MFX1.
5. MX-MF11 Multi Bypass Tray (for MX-LC13N)
A3-A5R, 500 sheets (80 g/m2).
MX-RB17 Connection Module
(Required between 2 x MX-LC13 N)
6. MX-RB16 Paper Pass Module
(between machine and MX-LC13 N). Required if MX-LC13 N is installed.
Finishing
MX-PE16 Fiery Server. Requires MX-PX16 Interface Kit.
MX-PX16 Interface Kit. Requires MX-PE16.
7. MX-RB18 Curl Correction Unit. Required if MX-FN21 or MX-FN22 is installed.
8. MX-CF11 Inserter (200-sheet x 2 bin)
A3–A5R, 200 sheets each (80 g/m2).
Requires MX-RB18 and either MX-RB13 or MX-FD10.
9. MX-GB57A GBC SmartPunch Unit (A4)
Available die sets: 21 holes, Plastic Comb; 20 holes, Plastic Comb
47 holes, Color Coil; 23 holes, Wire 2:1/Square
23 holes, Wire 2:1/Round; 34 holes, Wire 3:1/Square
34 holes, Wire 3:1/Round; 12 holes, VeloBind
34 holes, PloClick; 2 holes/Round (8mm pin)
4 holes/Round (8mm pin); 2 holes/Round (6.5mm pin)
4 holes/Round (6.5mm pin); 4 holes Scandinavian
Custom die sets also available on request
Requires MX-RB13 and either MX-FN21 or MX-FN22.
10. MX-RB13 Relay Unit (between 100-sheet Finisher and Inserter)
Must be installed if MX-FD10 is not required.
11. MX-FD10 Folding Unit (Z, C, accordion, double & half folds)
Can only be installed with MX-FN21 or MX-FN22.
12. MX-FN21 Finisher (4k - 100-sheet staple)
A3 - B5 (offset/staple), SRA3 - A5R (non offset)
Upper tray: 1,500 sheets*; Middle tray: 250 sheets*; Lower tray: 2,500 sheets*
100-sheet* staple capacity (front, rear or 2 point stitching)
Requires MX-RB18. Cannot be installed with MX-FN22.
13. MX-FN22 Saddle Stitch Finisher (4k - 100-sheet staple)
A3 - B5 (offset/staple), SRA3 - A5R (non offset)
Upper tray: 1,500 sheets*; Middle tray: 250 sheets*; Lower tray: 2,500 sheets*
100-sheet* staple capacity (front, rear or 2 point stitching)
Saddle stitch tray: 5 sets (16-20 sheets),
10 sets (11-15 sheets), 15 sets (6-10 sheets); 25 sets (1-5 sheets).
Max 20 sheets per set.
Requires MX-RB18. Cannot be installed with MX-FN21.
MX-PN13A/C/D Punch Module (A: 2, C: 2/4, D: 4 wide).
Requires MX-FN21 or MX-FN22.
MX-TM10 Trimming Module Can only be installed with MX-FN22.
14. MX-BM50 Booklet Maker (Plockmatic) A4, A3, SRA3. Requires MX-FN21.
Paper size: 206 x 275 mm (Min) to 320 x 457.2 mm (Max).
Paper Weight: 64-300 g/m2
Capacity: 1-30 sheets* (stapled and folded);1-6 sheets* (non-stapled and folded).
15. MX-TM50 Trimmer (Plockmatic). Requires MX-BM50.
Trim Length: 1-16 mm, Default: 4.5mm
16. MX-FD50 Square Folder (Plockmatic) A4, A3, SRA3.
Requires MX-BM50 & MX-TM50.
Paper size: 206 x 275 mm (Min) to 320 x 457.2 mm (Max)
Paper Weight: 64-300 g/m2. Capacity: 1-30 sheets* (stapled and folded).
17. MX-CF50 Cover Feeder(Plockmatic) Requires MX-BM50.
18. MX-XB50 Rail Unit (Plockmatic) Requires MX-BM50
* A4 or smaller, 80 g/m2.
Printing
MX-PF10 Barcode Font Kit
Sharp OSA®
MX-AMX1 Application Integration Module
Scanning
AR-SU1 Stamp Unit
Marks already scanned documents for checking.
Security
MX-FR66U Data Security Kit