Owner`s manual
108
5.4
Use
of the Floppy Disk
For information regarding the method used for setting the floppy disk
and
the method
of floppy disk drive operation, please refer to the Operation
Manual for model
MZ-IF02.
It
should be remembered
that
a master disk should be handled
and
used very carefully.
Moreover, because
Sharp
optional floppy disks
are
not initialized, please initialize them
by
a utility program before use.
Notes regarding the use
of
floppy disks
are
not initialized; please initialize them by a
utility program before use.
Notes regarding the use
of
floppy disks
•
If
fingerprints get on the floppy disk through the head window, read-out and
write-in will become impossible.
Take
the utmost care not to allow the surface
of
the floppy disk to become marked, stained, dirtied
or
defaced in any
way!
• Storage temperature conditions (around the floppy disk): 4°C - 53°C (39°F
127°F)
The jacket will become deformed if the temperature exceeds 53°C (127°F). Please
take care not
to
expose the floppy disk to direct sunlight for a long time and not to
place it in an environment where the temperature
is
apt to exceed 53°C (127°F).
When the floppy disk is used, please use it within the temperature range prescribed
on the protection sleeve. Moreover, because the environmental conditions
of
the
place
of
use differ from those
of
the place
of
storage, it is suggested that, before
use, the floppy disk
be
placed for a short time in conditions corresponding to those
of the place
of
use.
J
• When inserting the floppy disk into the floppy disk drive, insert it straight, gently,
and all the way until it
stop~.
Then move the front door lever to the horizontal
position. Rough handling will damage the floppy disk.
•
Do
not bend
or
fold the floppy disk,
If
the jacket becomes deformed, read-out and
write-in will become impossible.
...