Owner`s manual

94
DEF KEY
INIT
LABEL
15
DEF KEY(1) = "L The DEF KEY statement of statement number 15 defines
1ST" -+- CHRS(13) the function LIST IQY to
25
DEF KEY(2) =" L function key number 1, and statement number 25 defines
OAD:RUN" + the function LOAD:RUN IQY.
CHRS (13)
INIT" RS1:"
210 LABEL "SUB"
220
Sets the RS-232C mode.
Defines subroutine name beginning from statement num-
ber 210 as "SUB".
5.1.11 Comment Statements and Control Statements
REM 200 REM JOB-1 REM is a comment statement; ignored when program is
executed.
STOP
END
CLR
CLS
CURSOR
850 STOP
2000 END
300 CLR
Stops program execution and awaits command. If CONT
command given here, program continues.
Indicates
end of program. Executes program end.
All numerical variables and character variables become 0
or vacant (null); all array variables return to undeter-
mined condition. All
DEF FN statements also become
invalid.
10
CLS Erases the secreen in the scroll range.
50
CURSOR 25. 15 Specifies the position by numerals or variables: from 0 -
60 PRINT" ABC" 39 from the left end in the X axis direction, and 0 - 24
from the top
end in the Y axis direction. For the example
at the left, string "ABC" is displayed from the 26th cursor
position from the left
end of the screen and the 16th
cursor position from the top end.