Instruction manual
Cautions
(A) Installation
1.
Do
not
install the
unit
in the
following
places.
Damp places.
In
direct
sunlight.
Dusty places.
Places
where the temperature
is
very high
or
low.
Places
that
vibrate.
2.
Install the
unit
on a solid, level stand.
3.
Use
a power supply voltage
as
indicated on the rating name plate on the back
of
the
unit.
4. Do
not
install the
unit
near machines
that
generate a
lot
of
noise. Also
use
a separate power
source
for
these kinds
of
machines. This
will
prevent improper operation due
to
noise.
5.
Do
not
close the
ventilation
holes
of
the
unit
by
putting
things on
top
of
it
or
by
covering
it
with
a cloth, etc.
6.
Use
only
the supplied power cord.
(8)
Operation
1.
Do
not
use
the
unit
in ways
not
written
in the
instruction
manual.
2. When operating this
unit,
be
sure
that
all signal cable and
other
connections are right.
(See
page
3 and 5.)
3.
I mmediately pull
out
the power cord
if
water or
liquid
or metal objects, such
as
needles and
pins,
mistakenly get
into
the
unit.
Then, completely remove these foreign objects.
8