Instruction manual

Physical Characteristics
CD Front Door
® Diskette Loading Slot
@ Action Indicator
@ Drive Select Switch
This switch serves to identify the drive by
drive number setting.
@ FG (Frame Ground) Terminal
This terminal is used to interconnect two
drives through a braided wire.
@ Signal Terminal
The signal cable connector is connected to
this terminal.
c=J) Panel
Remove the panel. Then you will find there
a socket
to connect a terminal resistor to.
@ Power Switch
@ Power Connector
® Braided Wire
® Terminal Resistor
DRIVE SELECT
TERMINAL RESISTOR@
@
2JL--'!~~~~~~~!l.....JLS
®
11
2