Instruction manual

(4) When four MZ-80SFDs are used:
(Drive 4)
(Drive 3)
Any term inal resistor
must not be mounted.
• Set these MZ-80SFDs as drives 1,2, 3, and 4.
Mount the terminal resistor on drive 1.
(Drive 2)
Never mount any terminal resistor on drives 2 through 4.
(Drive 1)
(5) When one or two MZ-80SFDs are used in conjunction with the MZ-80FB floppy-disk drive
unit:
The
MZ-80FB (option) has two drives which have been set as drives 1 and 2; and it has been
already provided with a terminal resistor.
Therefore, when upgrading the drive system, a
maximum of two MZ-80SFDs can be used in
conjunction with the MZ-80FB. At this time no terminal resistor must be mounted on any
MZ-80SFD.
Q)
u
t
~
c
Q)
u
t
Q)
c
(Drive 3)
(Drives 1 and 2)
(Drive 4)
(Drive 3)
Any term inal resistor
must not be mounted.
6
Set the MZ-80SFD as drive 3.
Never
mount the terminal resistor.
MZ-80FB
(Drives 1 and 2)
Set the two MZ-
80SFDs
as drives 3 and
4.
Mount any terminal
resistor on neither of
these drives.