Installation Manual/Installationsanleitung

ManualsBrandsSharp ManualsSolarNQR256A

SIM424-002

PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE MODULES.

PLEASE PASS ALONG THE ATTACHED USER MANUAL TO YOUR CUSTOMER.

INSTALLATION MANUAL

– Crystalline Photovoltaic Module –

# IMPORTANT SAFETY INSTRUCTIONS p.1

# GENERAL INSTRUCTIONS p.1 ~ p.3

# INSTALLATION MANUAL -PHOTOVOLTAIC MODULES- p.4

# ELECTRICAL OUTPUT AND THERMAL CHARACTERISTICS p.4

IMPORTANT SAFETY INSTRUCTIONS

This manual contains important safety instructions for the PV

module that must be followed during the maintenance of PV

modules.

To reduce the risk of electric shock, do not perform any servicing

unless you are qualified to do so.

1. The installation must be performed by a certified installer

/servicer to ensure system integrity and safety.

2. The installation is only allowed after referring and

understanding of GENERAL INSTALLATION MANUAL and

INSTALLATION MANUAL -PHOTOVOLTAIC MODULE-. If

you don’t have your personal copy, please contact your

installer or local Sharp office listed in Sharp Solar web site :

URL : http://www.sharp-world.com/solar

3. Do not pull the PV cables.

4. Do not touch any surface of module.

5. Do not place/drop objects onto the PV modules.

6. Do not disassemble or attempt to repair the PV module by

yourself.

7. Do not drop the PV module.

8. Do not damage, pull, bend, or place heavy material on cables.

9. Upon completion of any service or repairs, ask the

installer/servicer to perform routine checks to determine that

the PV modules are in safe and proper operating condition.

10. When replacement parts are required, be sure the

installer/servicer uses parts specified by the manufacturer with

same characteristics as the original parts. Unauthorized

substitutions may result in fire, electric shock, or other hazard.

11. Consult your local building and safety department for required

permits and applicable regulations.

12. In regions with snow, the module can sustain a snow load of

up to 50cm (when the module is mounted in the portrait

orientation / short frame side facing down) or 100cm (when

the module is mounted in the landscape orientation / long

frame side facing down).

13. As a result of sliding snow, the mechanical load increases

when the number of module rows in the matrix of a PV

installation increases. When mounting the module in the

portrait orientation for more than 3 rows, the accumulated

snow load may cause the lower edge of the module frame to

deform. Take necessary measures (e.g. snow stopper) to

avoid possible damage.

14. Periodically remove any overhanging snow and/or ice from the

module framework as it may cause deformation of the module

frame.

GENERAL INSTRUCTIONS

1. INTRODUCTION

This Installation Manual contains essential information for the electrical and mechanical installation that you must know before

installing SHARP PV modules. This also contains safety information you need to be familiar with. All the information described in

this manual are the intellectual property of SHARP and based on the technologies and experiences that have been acquired and

accumulated in the long history of SHARP. This document does not constitute a guaranty, expressed or implied. SHARP does

not assume responsibility and expressly disclaims liability for loss, damage, or expense arising out of or in any way connected

with installation, operation, use or maintenance of the PV modules. No responsibility is assumed by SHARP for any infringement

of patents or other rights of third parties that may result from use of PV module. SHARP reserves the right to make changes to

the product, specifications or installation manual without prior notice.

2. COMPONENTS

3. GENERAL INFORMATION

(INCLUDING WARNING AND SAFETY)

The installation of PV modules requires a great degree of skill

and should only be performed by a qualified licensed

professional, including licensed contractors and licensed

electricians. Please be aware that there is a serious risk of

various types of injury occurring during the installation

including the risk of electric shock. All SHARP PV modules are

equipped with a permanently attached junction box that will

accept variety of wiring applications or with a special cable

assembly for ease of installation, and they do not require

special assembly.

MODEL

NQ-R series

CAUTION: HIGH VOLTAGE

To reduce the risk of electric shock, do not touch.

Summary of content (4 pages)

PAGE 1
SIM424-002 PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE MODULES. PLEASE PASS ALONG THE ATTACHED USER MANUAL TO YOUR CUSTOMER.
PAGE 2
SIM424-002 GENERAL WARNING 1. 2. 3. 4. 5. 6. PV modules are heavy. Handle with care. Before you attempt to install, wire, operate and maintain the PV module, please make sure that you completely understand the information described in this installation manual. Contact with electrically active parts of a PV module such as terminals can result in burns, sparks and lethal shock whether the PV modules are connected or not.
PAGE 3
SIM424-002 17. Do not damage the surrounding PV modules or mounting structure when replacing a PV module. 18. Bind cables by the insulation locks. Drooping down of cables from the junction box could possibly cause various problems such as animal biting, electricity leakage in puddle. 19. Take proper measures for preventing the laminate (consisted of resin, cells, glass, back sheet, etc.) from dropping out of the frame in case the glass is broken. 20.
PAGE 4
SIM424-002 INSTALLATION MANUAL -PHOTOVOLTAIC MODULESNQ-R series 1. INSTALLATION The mounting method has been verified by SHARP and NOT CERTIFIED by a third party organization. Please review the descriptions and drawings carefully; not mounting the modules according to one of these methods may void your guaranty. These mounting methods are basically designed to allow module loading of ±2400Pa. 2.