Specifications

8-3
8
Main Page
System Time
Defines the system time, using the format
hour:minute:second
(24-
hour format). The
Tab
key moves the cursor, and the
Space bar
and the
Plus
and
Minus
keys change numbers.
System Date
Defines the system date. The
Tab
key moves the cursor, and the
Space
bar
and the
Plus
and
Minus
keys change numbers.
Diskette A
Always set to
1.44MB,3½. You cannot change this item.
Diskette B
Lets you enable the floppy disk or define it as
Not Installed
. To use it,
set this item to
1.44MB,3½
".
Primary Master
Press
Enter
to display the primary master sub-menu.
Type
is set to
Auto
so that the system automatically detects the hard disk drive in your system.
Press
Esc
to return to the
Main
page.
Secondary Master
Press
Enter
to display the primary master sub-menu.
Type
is set
to
Auto
so that the system automatically detects the CD-ROM drive in your system.
Press
Esc
to return to the
Main
page.
Display Device Selection
This item determines where the video is displayed when
the system is first started. It is recommended to leave this at the default value
LCD/CRT
.
Resolution Expansion
If you enable this item, the system will add extra pixels to
screen resolutions that are less than 1024x768 so that they occupy the whole area of
the built-in display. Note that resolution expansion causes some distortion of the
image on the screen.
PS/2 Mouse
Enables or disables the glide pad built into your system.
Boot Options
Press
Enter
to display the Boot Options sub-menu. If
Summary
screen
is
Enabled
, the system shows a hardware summary at start-up time. If
Quiet
boot
is
Enabled
, the system displays the Sharp logo screen. Press
Esc
to return to the
Main
page.
System Memory
Shows the size of conventional memory for starting MS-DOS.