Specifications

8-4
8
Extended Memory
Shows the size of extended memory beyond 1 MB.
Advanced Page
Serial port
Sets the RS-232C serial port (only available on the optional Port
Replicator), selecting the base I/O address.
Enabled
means that you can set the item
yourself.
Auto
means that the item is automatically assigned.
Disabled
means that
you cannot use the port.
IrDA port
Sets the infrared port, selecting the I/O address and IRQ channel, and the
DMA channel.
Enabled
means that you can set the items yourself.
Auto
means that
all the items except the mode are automatically assigned.
Disabled
means that you
cannot use the port. Set to
Auto
during normal use.
Parallel port
Sets the printer port, selecting the mode, the base I/O address, and the
IRQ channel.
Enabled
means that you can set the items yourself.
Auto
means the
items except the mode are automatically assigned.
Disabled
means that you cannot
use the port.
Mode
Specifies the LPT port mode:
Bi-directional
,
ECP
(Extended Capabilities
Port mode),
EPP
(Enhanced Parallel Port mode) or
Output only
. If you set the mode
to ECP, you can also select a DMA channel.