User Manual

ENGLISH

Turning Power On/Off

Caution

• Turn on the monitor rst before turning on the computer or

playback device.

• To keep the performance of the WHITEBOARD stable, put

the monitor in the Power off (Standby mode) state once a

day.

Turning on the main power

Main power switch

The monitor enters the Power off (Standby mode) state.

Caution

• The main power must be turned on/off with the main power

switch. Do not connect/disconnect the power cord or turn

the breaker on/off while the main power switch is on.

• When switching the main power switch or the POWER

button off and back on, always wait for at least 5 seconds.

• For a complete electrical disconnection, pull out the main

plug.

• Before switching off the main power switch, always put the

monitor in the Power off (Standby mode) state. (Hold down

the POWER button until the exit screen appears.)

Turning power on

1. Press the POWER button.

POWER button / Power LED

Status Status of the monitor

Green lit Power on

Orange lit Power off (Standby mode)

Orange ashing

Power off

(Whiteboard standby mode)

Green ashing Input signal waiting mode

• The WHITEBOARD appears.

(Factory setting. Can be changed in START INPUT MODE

in the SETUP menu.)