ENGLISH ESPAÑOL РУССКИЙ OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D’EMPLOI MANUAL DE INSTRUCCIONES РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ Փ⫼䇈ᯢк FRANÇAIS LCD MONITOR LCD FARBMONITOR MONITEUR LCD MONITOR LCD ЖК МОНИТОР ⎆ᰒ⼎఼ DEUTSCH PN-S525 ∝䇁 ENGLISH ...... E1 DEUTSCH ..... D1 FRANÇAIS .... F1 ESPAÑOL .... S1 РУССКИЙ ..... Р1 ∝䇁 ............... C1 (.
IMPORTANT: To aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY FOR CUSTOMERS IN U.K.
LCD MONITOR ENGLISH PN-S525 ENGLISH IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT INFORMATION (Continued) WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC Rules.
IMPORTANT INFORMATION (Continued) ENGLISH The battery supplied with this product contains traces of Lead. For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation. Please contact your local authority for details on the collection and recycling schemes.
SAFETY PRECAUTIONS (Continued) 14. R epair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service person to perform repairs. a. When the power cord or plug is damaged. b. When a liquid was spilled on the product or when objects have fallen into the product. c. When the product has been exposed to rain or water. d. When the product does not operate properly as described in the operating instructions.
TIPS AND SAFETY INSTRUCTIONS - Do not display a still picture for a long period, as this could cause a residual image. - Never rub or tap the monitor with hard objects. - Please understand that SHARP CORPORATION bears no responsibility for errors made during use by the customer or a third party, nor for any other malfunctions or damage to this product arising during use, except where indemnity liability is recognized under law. - This monitor and its accessories may be upgraded without advance notice.
Contents IMPORTANT INFORMATION.............................................1 DEAR SHARP CUSTOMER...............................................3 SAFETY PRECAUTIONS...................................................3 TIPS AND SAFETY INSTRUCTIONS................................5 Supplied Accessories.......................................................7 Part Names........................................................................7 How to Install the Monitor...............................................
Supplied Accessories � Liquid Crystal Display: 1 � Power cord: 1 � R-6 battery (“AA” size): 2 � CD-ROM (Utility Disk for Windows): 1 � Operation manual: 1 � Blank sticker: 1 Place a blank sticker onto the SHARP logo to cover the logo. � Vertical logo sticker: 2 � Remote control unit: 1 � Temporary stand: 2 � Cable clamp: 2 ENGLISH If any component should be missing, please contact your dealer. � Power cord clamp: 1 INPUT * Sharp Corporation holds authorship rights to the Utility Disk program.
Part Names nRear view 19 18 1 3 4 5 6 7 9 1011 8 2 12 13 14 1516 17 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. Main power switch (See page 14.) AC input terminal (See page 12.) PC/AV output terminal (DVI-D) (See page 11.) PC1 input terminal (DVI-D) (See page 10.) AV1 input terminal (DVI-D) (See page 10.) PC2 input terminal (HDMI) (See page 10.) AV2 input terminal (HDMI) (See page 10.) PC3 input terminal (Mini D-sub 15 pin) (See page 10.
How to Install the Monitor • Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor. • When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people. • A stand and mounting bracket compliant with VESA specifications is required. Do not use any screw holes other than VESA holes for installation. • When moving the monitor, be sure to hold it with the handles both on the rear and the unit bottom. Do not hold the LCD panel.
Connecting Peripheral Equipment • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to mix up the input terminal with the output terminal when connecting cables. Mixing up the input and output terminals may cause malfunctions and the other problems.
Connecting Peripheral Equipment Connecting multiple monitors PC/AV audio output terminals • Audio from the equipment connected to the AV audio input terminals or PC audio input terminal is output. Connect to the audio input terminals of the connected equipment using a commercially available audio cable (RCA). • The audio output varies depending on the input mode selection. (See Operation guide.) • The volume level can be adjusted using the volume adjustment. (See Operation guide.
Connecting the Power Cord Caution • Do not use a power cord other than the one supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the AC power outlet. 3 Main power switch 1 For power outlet 2 AC input terminal Power cord (Supplied) Mounting the Temporary Stands Caution • The monitor is heavy. Make sure to handle the monitor with at least 2 people.
Binding Cables ENGLISH nAttaching the cable clamp Cable clamp positions The cables connected to the terminals on the back of the monitor can be neatly bundled using the supplied cable clamps as shown in the illustration. Insert the cable clamp into a hole. (any hole available) Cable clamp attachment Cable clamp Caution • Verify the position for attaching a cable clamp in advance. A cable clamp cannot be removed once it is attached.
Turning Power On/Off Caution TIPS • Turn on the monitor first before turning on the PC or playback device. Turning on the main power • If the monitor is in the input signal standby mode and you press the POWER button on the remote control unit, the monitor enters standby mode. • You can turn on/off the monitor by pressing the power switch of the monitor. • Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode.
Troubleshooting There is no picture or sound. • Is the power cord disconnected? (See page 12.) • Is the main power switch set to “OFF”? (See page 14.) • Is the monitor in standby mode (the power LED illuminating in orange)? (See page 14.) • Make sure correct input mode is selected. (See Operation guide.) • If any external equipment is connected, make sure the equipment is operating (playing back). Remote control does not work. • Are the batteries inserted with polarity (+,-) aligned? (See page 13.
Specifications nProduct Specifications Model LCD element Max. resolution (pixels) Max. colors Pixel pitch Viewing angle Screen active area inch (mm) Computer input signal Sync signal PN-S525 52" wide (132.2 cm diagonal) ASV low-reflection black TFT LCD 1920 x 1080 16.77 M colors (8 bits/color) 0.600 mm (H) x 0.600 mm (V) 176° right/left/up/down (contrast ratio ≥ 10) 45-3/8 x 25-1/2 (1152.0 x 648.0) Digital (DVI 1.0 standard-compliant), Analog RGB (0.
Specifications Note that the values shown are approximate values. 34-3/4 [882] Unit: inch [mm] VESA holes 7-7/8 [200] 7-7/8 [200] 7-7/8 [200] 10-11/16 [271] 49-3/8 [1254] 3-5/8 [92] Opening width (45-9/16 [1157]) 2-5/8 [66] 7-7/8 [200] Opening height (25-11/16 [653]) 29-3/16 [742] 3-3/4 [95] 5-7/8 [149] ENGLISH nDimensional Drawings When mounting the monitor, be sure to use a wall-mount/ceiling-mount bracket they comply with the VESA-compatible mounting method.
Specifications nDDC (plug and play) The monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play monitors. There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.