Specifications

www.lym a n p roducts.com
4
Crusher
TM
- Reloading Press
Our Crusher is the ideal press for reloading both rifle and pistol cartridges.
The Crusher starts with a 1" diameter ram, compound linkage and a 4 1⁄2"
press opening which makes even the largest magnum cartridges easy to
load. Its classic “O” frame design takes all standard 7⁄8" x 14 dies. The
Crusher is equipped with hardened and ground linkage pins and retaining
rings for a smooth and tight operation. The base design has 14 square
inches of “machined flat” surface area with 3 mounting bolt holes for per-
fect rigid mounting. Crusher’s ball handle mounts for either right or left
handed operation. Durable “silver hammertone” powder coat finish and
non-rust handle and links makes sure it lasts as good as it looks.
Crusher II (19 lbs.) (#7726300) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$189.95
Large 4
1
⁄2"
Frame Opening
Right or Left
Hand Opera-
tion
Durable “Silver
Hammertone”
Powder Coat Finish
T-Mag II Reloading Press
America’s favorite high speed turret press of-
fers unmatched versatility, power and preci-
sion. The T-Mag II has a Hi-Tech iron frame
with state of the art silver hammertone pow-
der coat finish for guaranteed durability.
Lyman’s improved Turret Retention System
allows smooth indexing while maintaining rock solid
turret support. The turret handle makes indexing easier than ever. The T-
Mag II’s six station turret head lets the reloader mount up to six different
reloading dies at one time. Like more expensive progressive presses the
turret head detaches to easily change calibers while retaining precise set-
up. The turret handle doubles as a turret removing wrench. No tools re-
quired. Obtain extra turret heads and have all your favorite calibers set up
to reload.
The T-Mag II features a “flat machined” base that mounts easily to a wood
or metal bench. Compound leverage assures a powerful and smooth op-
eration. The handle mounts for either right or left hand use. The T-Mag II
uses standard 7⁄8" x 14 dies and can be used for reloading rifle or pistol
cases. It comes with universal priming arm, primer catcher, and turret han-
dle.
T-Mag II Press (19.5 lbs.) (#7040781) . . . . . . . . . . . . . . . . . . . . . . . . . . .$274.95
Base Design is
“Machined Flat” for Per-
fect Mounting to Wood or
Metal Bench
Durable “Silver Hammertone”
Powder Coat Finish
Bench Wrench
Lyman’s Bench Wrench fits all current Lyman
die lock nuts and Lyman T-Mag turret support
post. The wrench fits Lyman decapping rod,
seating screw and expander plug hex nuts. Also
Lyman & RCBS 7⁄8 x14" nuts.
Bench Wrench (#7990116) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.25
Press Accessories
Primer Catcher
Made of heavy duty plastic. Unit locks securely to press, but is easily re-
moved when emptying primers. Fits Crusher II, T-Mag Compound Presses.
Primer Catcher (1 oz) (#7726420) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$8.75
Auto-Primer Feed
Eliminates handling of primers with oily fingers, speeds loading. Supplied
with 2 tubes (large & small). Fits T-Mag II and Crusher II.
Auto-Primer Feed (3 oz.) (#7729050) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$32.50
Universal Priming Arm
Seats all sizes and types of primers. Supplied with two priming
sleeves (large and small).
Universal Priming Arm (2 oz.) (#7728036) . . . . . . . . . . . . . . . . . . . . . . . . .$18.50
Extra T-Mag Turret
With an extra detachable T-Mag Turret, re-
loaders can maintain precise set-up while
changing calibers. (Will fit old T-Mag. Turret
handle not included).
Extra Turret (3 lbs.) (#7726153) . . . . . . . .$59.95
RELOADING PRESSES . . . . . . . . . . . . . . . . . . . . . . . . . . . . .