Operation Manual

EN-14
LOADING YOUR DISHWASHER
Folding Racks
If you properly place your dishes into the machine, you will be using it in the best way in terms of energy con-
sumption, washing and drying performance. There are two separate baskets for you to load your dishes into
your machine. You can load into the lower basket such round and deep items as pots with long hand-les, pot
lids, plates, salad plates, cutlery sets. The upper basket has been designed for tea plates, dessert plates, salad
bowls, cups and glasses. When placing long-stem glasses and goblets, lean them against the basket edge,
rack or glass supporter wire and not against other items. Do not lean long glasses against one another or they
cannot remain steady and may receive damage. It is more appropriate to locate the thin narrow parts into the
middle sections of baskets. You can place spoons among the other cutlery sets in order to prevent them from
sticking to one another. You are recommended to use the cutlery grid in order to obtain the best result. To avoid
any possible injuries, always place such long-handle and sharp-pointed dishes as serving fork, bread knife etc.
with their sharp points facing down or horizontally on the baskets.
Warning: Place your dishes into your machine in a way that they will not prevent the upper andlower spray arms
from spinning
Fixed Rack
There are dish racks on the upper basket of your machine.
a b You can use these dish racks in open or closed posi-
tion. When they are in open position a you can place your
cups on them; and when in closed position b you can place
long glasses on the basket. Also, you can use these racks
by placing long forks, knives and spoons on them laterally.
Folding Racks
Foldable racks on the upper basket are designed in order to let you place big items easier such as pots, pans,
etc. If requested, each part can be folded separately, or all of them can be folded and larger spaces can be
obtained.You can use foldable racks by raise them upwards, or by folding down.
Top basket height adjustment
Top basket of your machine is in upper position. When it is in this position, you can place big items such as pans,
etc. on lower basket. When you take top basket to lower position, you can place and wash big sized plates on
the top basket. Use wheels in order to change the basket height. Open the basket retaining parts at the end of
top basket rails by turning them to the sides, and take the basket out. Change the position of the wheels; rein-
stall the basket to the rail, and close basket retainer parts. In this way, you take the top basket to lower position
CHAPTER-5: LOADING YOUR DISHWASHER
a
b