Operation Manual

EN-20
Switching on the machine
1. Press the Power On/Off key.
2. Select the program suiting your dishes via the Program Selection button.
3. Close door. The program starts automatically.
Note: If you decide not to start to machine after selecting the program , just press the on/off button. Y
our
machine will become ready for the new program selection when you press on/off button again. You can select
the new program by pressing the program selection button.
Program follow-up
Changing a programme
If you would like to change programs while a washing program is continuing.
Note: When the door of the machine is opened in order to stop the washing program before it is completed rst
open the door slightly in order to avoid water spillage.
CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME
=
==
=
When you select a program with the pro-
gram selection button, the light of the se-
lected program turns on and the end of
program indicator turns off.
Once the power on/off key is
pressed, the end of program
indicator turns on.
Do not open the door before the
program ends.
End of program indicator on the control
panel turns on when the selected washing
program is completed .Your machine also
gives a buzzer sound for “5 times” when
the program is completed.
After closing the door, the
new program started will
resume the course of the
old program.
Open the door and select a
new program by pressing the
program selection button.