Operation Manual

EN-21
CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME
Changing a programme with resetting
If you would like to cancel a program while a washing program is resumed.
Note: When the door of the machine is opened in order to stop the washing program before it is completed rst
open the door slightly in order to avoid water spillage.
Switching the machine off
NOTE: After the buzzer sound which indicates the end of the program when the washing program comes to an
end (end indicator light is on), you can leave the door of your machine ajar in order to hasten the drying.
Note: If the machine door opens during washing or the power is cut off, the machine will go on to the program
in case the door is shut or the power is back.
Note: If energy is cut or machine door is opened during drying process, program is terminated. Your machine
becomes ready for new program selection.
=
=
Open the door of your ma-
chine. Light of the last se-
lected program will turn on.
Keep the program selection but-
ton pressed for 3 seconds. (End
of program indicator ashes and
program light turns off)
Discharge process starts after closing
the door of the machine. The machine
discharges the water in it for about
30 seconds. When the program is
cancelled,your machine gives a buzzer
sound for “5 times “ and the “end of pro-
gram indicator” turns on.
When end of the program indica-
tor turns on , switch your machine
off by using the Power On/Off
button.
Pull the plug out of the outlet.
Turn of the water tap.