Operation Manual

EN-23
CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME
4.
4
The lamp on Program Start/Pause
key goes off once the Program
starts and the washing light not
lamp is highlighted.
Once the Power On/Off key
is pressed, the light not
lamp Power Start/Pause is
highlighted.
1
2
3
4
Press the Power On/Off key.
Select the program suiting
your dishes via the Program
Selector button.
You can choose an
additional function if you
wish.
Start the program pressing the
Power Start/Pause key.
4.
4
1
As long as Washing and Drying goes
on the Washing/Drying light not
lamp stays lit .When drying is active
machine stays silent about 40-50
minutes.
Do not open the cover before
the nished lamp is on.
Once the program is over, the
nished lamp is illuminated.
Switching on the machine
Program follow-up
You can follow the program ow using the program follow-up lamps located on the control panel.
Changing a programme
If you would like to change programs while a washing program is continuing.
Start the program you have
newly selected by pressing
again the Start/Pause key.
The new program started
will resume the course of
the old program.
After the program stops,
select your desired program
via the Program selector
button.
Press the power Start/
Pause key once.