Operation Manual
EN-24
Changing a programme with resetting
If you would like to cancel a program while a washing program is resumed.
Switching the machine off
Note: You can slightly open the door in order for the machine to perform a faster dry operation after the wash
programme is î‚¿nished.
Note: If the machine door opens during washing or the power is cut off, the machine will go back to the original
program when the door is shut or the power returns.
Hold the Start/Pause button
pressed for approx. 3 sec.
until the Finish light blinks.
Once the Finish light comes
on, it means that the cycle
has been cancelled.
After the Finish light starts blinking,
the water inside is discharged for
approx. 30sec.
Pull the plug out of the outlet.
Turn off the water tap.
When the end light illuminates, switch
your machine off by using the Power
On/Off button.
CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME