Owner`s manual

- 96 -
EO1-11116
MA-516-100 SERIES
MGR Position Reference
KEY (See Chapter Page
“22. System Option Setting”.)
[RTN MDSE] Address 5 - Bit 1 124
[PO] Address 5 - Bit 2 124
[DOLL DISC] and [%-] Address 5 - Bit 3 124
Not required
Required
19. Operations in “MGR” Mode
This chapter describes operations to be performed in the “MGR” position of the Control Lock, which the Store Manager
can access using the MGR or MA key.
WARNING!
When opening the cash drawer, be careful not to let the drawer hit any person.
Items programmed to require Manager Intervention
During daily sale entry operations, the cashier may call for Manager Intervention. The following is the operation flow
of Manager Intervention.
1) During operations, the cashier comes across an item that requires Manager Intervention. The cashier,
already informed of it, may immediately call for Manager Intervention. Or the cashier, without knowing of it,
attempts the operation, and an error results, clears the error by the [C] key, and then calls for Manager
Intervention.
2) The Store Manager goes to the cashier counter with the MGR or MA key.
3) The cashier explains what kind of operation is to be entered and removes the REG key from the Control Lock
at the “REG” position.
4) The Store Manager insert the MGR or MA key and turns it to the “MGR” position.
5) The cashier operates the required item.
6) The Store Manager returns the MGR or MA key to the “REG” position and pulls it out.
7) The cashier returns the REG key to the “REG” key position and continues sale entry operations.
The following are the tables of the keys and operations that are programmable with Manager Intervention. Fill in the
tables by marking in the “Not required” or “Required” column of each item, referring to the System Option Setting
Addresses (Chapter 22). Or only to read the set status of each Address and Bit, refer to Chapter 23. Program Data
Verification on page 136.
Keys and Manager Intervention Status