Owner`s manual

- 48 -
EO1-11116
MA-516-100 SERIES
Preset-price Department
If an error occurs here:
Possible cause of error:
• Exceeding the LC of the Department
→ Check the Unit Price.
→ See Listing Capacity Open.
• Product exceeding 7 digits.
→ Check the Quantity and Unit Price.
• Department requiring Manager Intervention.
→ Ask the manager to turn the Control Lock to
MGR.
Department Quantity Extension (Multiplication):
When more than three or four items are to be entered with the same Department and price, the Quantity Extension
(multiplication) is quicker than the Repeat Entry.
Open-price Department
.....
@/FOR
→
→
→
Dept.
.......
Depress the [DPT SHIFT] key at either position to
enter a sale item of the Department Nos. 21 to 40.
3 digits for inte-
ger (max.)
If an error occurs here:
Possible cause of error:
• Exceeding the digit limit
Quantity;
max. 6 digits
0.001 to 999.999
NOTE 1
→
Dept.
()
To enter sale item of
the Department Nos.
21 to 40.
.....
DPT
SHIFT
If an error occurs here:
Possible cause of error:
• Product exceeding 7 digits.
→ Check the Quantity.
• Department requiring Manager Intervention.
→ Ask the manager to turn the Control Lock to
MGR.
→
()
Product must not
exceed 7 digits.
Unit Price;
max. 6 digits
()
Product must not
exceed 7 digits.
•
3 digits for deci-
mal (max.)
Required only for any
decimal portion entry.
Examples) 123:
23.4:
0.234: ( )
NOTES 1. When the Quantity is a 1-digit integer (1 to 9) and a Preset-price Department Key is to follow,
the [@/FOR] key is omissible.
2. The product obtained by Quantity Extension cannot be repeated.
3. The decimal portion of the Quantity entry is processed down to the 2 digits below the decimal
point. The fraction rounding at this time is fixed to ROUND OFF.
4. You can select the rounding process of the fractions of the product (result of multiplication)
-- ROUND OFF (initial setting), ROUND UP, or ROUND DOWN. (Refer to Chapter “22.
System Option Setting” Address 2 - Bits 1 and 2 on page 120.)
.3
2
3
2
1
4
2
.
0 3 4