Service manual

R-630DK

R-630DW

R-630DS

Figure C-10. Routing of wire harness

NOTE: For key sheet

1. Before attaching a new key sheet, wipe off

remaining adhesive on the door screen surfaces

completely with a soft cloth soaked in alcohol.

2. When attaching the key sheet to the door screen,

adjust the upper edge and left edge of the key

sheet to the correct position of door screen.

3. Stick the key sheet firmly to the door screen by

rubbing with a soft cloth so not to scratch.

NOTE: For CPU unit

Handle the CPU unit carefully so that the ribbon

cable does not come off. Because the ribbon cable

is glued onto the LCD and the printed wiring board

only by heated paste.

Printed wiring board

of CPU unit

Liquid Crystal

Display (LCD)

Ribbon cable

Figure C-11. CPU unit

PWB Cover

Tabs

Tabs Tabs

Door screen

wire harness