Builder's Guide

15
INSTALL DEFLECTOR
TRUE FLUSH DIMENSIONS
17-1/8"
Shelf detail showing the deflector vent installed.
Shelf detail showing the deflector vent during installation.
Position deflector vent and mark holes.
Pre drill using a
1
/16" (1.57 mm) bit before mounting.
C
L
Top View
A
Anti-Tip block
Note: the mounting surface of the finished cleat
must sit 1
1
/16" back from the face of the cabinet
(pushing the face of the drawer out
1
/4" ).
B C
Mounting
cleat
Drawer
face
Cabinet
face