RK94S27F, RK94S30F Installation Manual

E 6

FLUSH INSTALLATION INSTRUCTIONS

B. Position DUCT (A)-1 on the top of the oven inserting

edge of DUCT (BC) assembly into hole lip of DUCT (A)-

1. Tighten 2 SCREWS (I), securing DUCT (A)-1 to DUCT

(BC) assembly. See Figure 4.

SCREW (I)

DUCT (A)-1

DUCT (BC)

SCREW (I)

FIGURE 4

C. Position DUCT (A)-2 on the top of the oven and insert it

into the hold lip of DUCT (A)-1. Secure DUCT (A)-2 to

DUCT (A)-1 using 2 SCREWS (I) provided. See Figure 5.

SCREW (I)

DUCT (A)-2

DUCT (A)-1

FIGURE 5

D. Position DUCT (A)-3 on top of the oven and insert it into

DUCT (A)-2. Secure DUCT (A)-3 using 3 SCREWS (I)

provided. See Figure 6.

SCREW (I)

DUCT (A)-3

DUCT (A)-2

FIGURE 6

E. Remove SCREWS from the upper right and left corners

at the rear of the oven. Place duct assembly on the top

of the unit as shown and secure the duct assembly to the

oven using the 2 SCREWS just removed from the oven.

See Figure 6B.

SCREW

FIGURE 6B

STEP 3 - EXHAUST DUCT ASSEMBLY INSTALLATION

A. Place the Exhaust Duct Assembly in the center of the

opening. Align the front edge of the duct with the front of

the cabinet. Align the front edge of the right side of the

duct with the front of the shelf. See Figure 7.

B. Secure the Exhaust Duct Assembly with 2 SCREWS (H).

See Figure 7.

Exhaust duct assembly

right side aligns to front

edge of shelf

Screw H

FIGURE 7