RK94S27F, RK94S30F Installation Manual

E 8
E. Install Air Deectors top and bottom. Center (left and
right) the Air Deectors above and below the installed
BACK FRAME. Secure Air Deectors with 4 SCREWS (G).
See Figure 12. Mark holes and pre-drill the wood cleats
with
1
⁄16” drill bit.
FIGURE 12
F. FRONT FRAME INSTALLATION: Place the FRONT
FRAME onto the BACK FRAME and align ball studs
and receivers. Secure the FRONT FRAME to the BACK
FRAME by rmly pushing the FRONT FRAME onto the
BACK FRAME, engaging the 4 snap attachments. See
Figures 13-14.
Snap
Attachment
FIGURE 13
FIGURE 14
SHARP ELECTRONICS CORPORATION
100 Paragon Drive • Montvale, New Jersey 07645 • U.S.A.
SHARP ELECTRONICS OF CANADA LTD.
335 Britannia Road East • Mississauga, Ontario L4Z 1W9 • Canada
For any other assistance or information about this kit,
in USA please call Sharp’s Customer Assistance Center at
1-800-BE-SHARP (1-800-237-4277)
In Canada, call 905-568-7140