SCH-R850 Series P O R T A B L E M O B I L E D U A L - M O D E P H O N E User Manual Please read this manual before operating your phone, and keep it for future reference.
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
Printed in Korea. Nuance®, VSuite™ T9 Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the United States and/or other countries. The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered trademarks and are wholly owned by the Bluetooth SIG. microSD™ and the microSD logo are Trademarks of the SD Card Association.
Table of Contents Section 1: Getting Started ..............................................4 Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4 Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Memory Card (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . .
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Message Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Erasing Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 56 58 58 Section 8: easyedgeSM .................................................. 60 Finding Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 15: Toneroom ................................................ 126 Accessing Toneroom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Managing Your Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Section 16: Phone Info ............................................... 127 Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Icon Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Version . . . . .
Section 1: Getting Started This section explains how to start using your SCH-R850 phone by activating your service, setting up your Voicemail, or getting an understanding of how this manual is put together. Understanding this User Manual The chapters of this manual generally follow the same order as the menus and sub-menus in your phone. A robust index for quick reference to most features begins on page 156. Also included is important safety information that you should know before using your phone.
Use the Travel Adapter The travel adapter included with your phone is a convenient, light-weight charger that rapidly charges your phone from any 120/220 VAC outlet. 1. 2. Plug the large end of the USB Data Cable supplied with your phone into the Travel Adapter, as shown. Incorrect Correct Plug the Travel Adapter into a standard 120 VAC or 220 VAC wall outlet.
Activating Your Phone Contact your Wireless Carrier and follow their instructions for obtaining service, if necessary. We suggest that you read this guide to fully understand the services your phone supports. Install the Battery Note: Your phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel adapter. 3. Remove the Battery 1. Press and hold to turn off the phone (if on). 2.
Turn Your Phone On 1. Press and hold the LOCK key ( ), on the top of the phone. Note: If your phone is on and you press for less than one second, the phone will not power off. This prevents your phone from being turned off accidentally. Setting Up Your Voicemail Voicemail allows callers to leave voice messages, which can be retrieved any time.
Memory Card (Optional) You can install a microSDTM card to provide additional memory for storing files (such as, sound files and photos) in your phone. Install a Memory Card 1. Open the microSD cover on the right hand side of the phone, as shown. 3. Slowly release your pressure on the card. It will slide outward a short distance. 4. Remove the memory card from the memory card slot. 5. If desired, install another memory card. (For more information, refer to “Install a Memory Card” on page 8.) 6.
Section 2: Understanding Your Phone This section outlines some key features of your phone. It also describes the screen format and the icons that will be displayed when the phone is in use. Front View of Your Phone Features of Your Phone • Full-screen Touch Screen [high-resolution (240 x400 pixels), color] • Widget bar and three-page Standby and Main Menu screens • Motion and position sensitivity • Full-HTML Browser • Messaging (Text, Picture, Video, and Email) with QWERTY Touch Keypad • 3.
Power / Accessory Connector — Used to connect charging accessories or any available accessory cables to your phone. 11. Voice Recognition Key — Used to launch VoiceSignal voice 4. Volume Key — Lets you adjust the ring volume in Standby mode, adjust the voice volume during a call, or mute the ringer during an incoming call. microSD™ memory card for additional multimedia file storage. 5.
Rear View Command Keys Power On-Off/LOCK key • Press and hold the Power On-Off/LOCK key ( ) to turn your phone on or off. • With the phone keys and touch screen locked, press and hold the Power On-Off/LOCK key ( ) to unlock the phone. Note: With the phone locked, you can still answer incoming calls by pressing the Talk key. 11 1. Camera Lens — The lens of your built-in camera. 2. Flash — Lets you take photos in low light conditions. 3. Battery Cover — Protects the battery. 4.
Send Key The Send key ( ) is used to answer calls, dial calls, and to recall the last number(s) dialed, received, or missed. • Press once to answer calls. • Enter a number and briefly press to make a call. • Briefly press in Standby mode to display a list of recent calls to and from your phone. • Press twice in Standby mode to call the most recent number. • Press to pick up a waiting call. Press again to switch back to the other call.
4. 5. • Menu — Launches the Main Menu. The center portion of the display shows information such as call progress information, messages, and photos. Tapping the top line of the display pulls down a four-icon shortcut bar. To hide the four-icon shortcut bar, tap anywhere on the screen below the shortcut bar. Display Screen Icons Your phone can show you definitions of the icons that appear on the top line of the display.
Input Mode Input mode determines how you enter text, numbers, and symbols. While at any text entry screen, press the down arrow in the upper left corner of the screen, then select the input mode from the drop-down menu. Optional input modes are: • 3X4Keypad (phone-style touch keypad) • QWERTY (full touch keypad — changes display to landscape mode) • Handwriting box (divided pallet) • Handwriting full screen (undivided pallet) (For more information, refer to “Changing the Text Entry Mode” on page 45.
Place Calls in Standby Mode 1. In Standby mode, enter a phone number, and press to place a call. 2. Press from the display and the desired ringer value appears. Vibrate Mode 䊳 to return to Standby mode. In Standby mode, repeatedly press the Volume key ( ) down until “Vibrate only” appears in the display. Receive Messages in Standby Mode While your phone is in Standby mode, new incoming messages automatically appear in the screen as they are received.
Music Player Mode The Music Player in your phone can play music files (MP3, CMX, Midi, AAC, AAC+, and eAAC+), but only if they are stored in the My Music folder on an optional microSD Memory Card. – In Standby mode, press the Menu soft key, then select Camera. – In Standby mode, press the Menu soft key, then select Multimedia ➔ Camera. – In Camcorder mode, select . • Exiting Camera Mode — Press Note: For more information, refer to “Memory Card (Optional)” on page 8.
Note: For more information, refer to “Memory Card (Optional)” on page 8. • Entering Video Player Mode: 1. In Standby mode, press Menu, then select Multimedia ➔ My Videos. – or – In camcorder mode, press . The Videos screen appears containg a list of videos with thumbnail images appears in the display. 2. Select the desired video. The Video Player screen appears in the display and begins playing the highlighted video. Note: For more information, refer to “Video Player” on page 84.
Section 3: Call Functions This section explains how to make or answer a call. This section also includes the features and functionality associated with making or answering a call. Making a Call — Number Entry Dialing 1. With the phone on, press the Dialer soft key. The touch keypad screen appears in the display. 2. Enter the number you wish to call using the touch keypad. 3. Press or the Voice Call soft key to place the call.
Instead of manually entering the numbers each time, you can store the numbers in your Contacts along with special characters called pauses. • W Pause — A hard pause stops the calling sequence until you press . • P Pause — A two-second pause stops the calling sequence for two seconds and then automatically sends the remaining digits. Making a Call — Speed Dialing To manually call a number with pause(s) without storing it to your Contacts: One-Touch Dialing 1.
Pause Dialing From a Contacts Entry • If you speed dial a contact that contains two-second (P) pause(s) simply wait for the pauses to pass and the dialing to complete. • If you speed dial a contact that contains hard (W) pauses, wait for the appropriate prompt(s) from the number you are calling (credit card number, bank account number, and so on) and press to continue your dialing sequence. Note: For more information about dialing pauses, refer to “Manual Pause Calling” on page 18.
5. Say one of the following number types: • “Mobile” • “Home” • “Work” • “Fax” Voice Dial dials the specified number. (For more information, refer to “Confirmation” on page 89.) Dialing a Number To dial a number using Voice Dial, do the following: 1. In Standby mode, press the Voice Recognition key ( ). “Say a Command” appears in the display and is pronounced through the speaker. 2. Say “Call”. VoiceSignal prompts you to “Say the name or #”. 3.
– You answer the call. – You ignore the call. – The calling party ends the call. – The call is sent to voicemail. Review the Calls Log 1. In Standby mode, press the Menu soft key, then select Calls. The Calls list appears in the display showing All calls. 2. Select the Down arrow in the upper right corner of the screen. The following Calls log options appear in a dropdown menu: • All • Incoming • Outgoing • Missed • Data Answering an Incoming Call 䊳 Press the key.
Note: In cases where a Calls log entry concerns a call to or from a Contacts entry, the Contact name associated with the number appears in the Calls log list instead of the number. Outgoing Calls Your phone retains information about the last 90 outgoing calls and stores them in the Outgoing calls log. You can review the Outgoing calls log for the time and date of a call, as well as other information. Note: In Standby mode, you can quickly view your most recent calls of all types by briefly pressing .
Incoming Calls Your phone retains information about the last 90 Incoming calls and stores them in the Incoming calls log. You can review the Incoming calls log for the time and date of the call, as well as other information. 1. In Standby mode, press the Menu soft key, then select Calls. The Calls list appears in the display showing All calls. 2. Select the Down arrow in the upper right corner of the screen, then select Incoming. A list of Incoming Calls appears in the display. 3.
2. Select the Down arrow in the upper right corner of the screen, then select Missed. A list of Missed Calls appears in the display. 3. Select a call to view further information about it. The call information screen shows the caller’s name (Contacts only), the number called received from, the time and date the call was received, and the duration of the call. 4. 25 The call information screen offers the following options: • — Press to dial this number.
• To add the number to your Contacts list, press the Add To Contacts soft key. • Contacts only — To view Contact information for this call, press the View details soft key. • To delete the selected call from your Calls log, press the Erase soft key. • To block / permit deletion of the selected call, press the More soft key, then select Lock. • To copy this number to the Dialer screen so that you can make changes (such as, to add Pauses) before reuse, press the More soft key, then select Copy to dialer. 4.
1. In Standby mode, press the Menu soft key, then select Calls. The Calls list appears in the display showing All calls. Press the Data Counter soft key The following options appear in the display: • Transmitted — View the total amount of data transmitted by your phone since the last reset. • Received — View the total amount of data received by your phone since the last reset. • Total — View the total amount of data sent or received by your phone since the last reset.
Section 4: Menu Navigation This section explains the menu navigation for your phone. It also describes the menus available with your phone. Menu Navigation Access menus using the Menu soft key, other soft keys, or icons on the Widget Bar or Shortcut Bar. 1. 2. 3. In Standby mode, press the Menu soft key. The Main Menu page (the first of three pages) appears in the display.
4. 5. To reposition an icon on the page, press and drag the icon to its new position. All other icons to the right of, and below, this position automatically shift their own positions in sequence. Widget Bar Shortcuts 1. In Standby mode, press the right arrow tab on the left edge of the display. The Widget Bar slides open to the right and lists icons for those Widgets selected in the Widget settings. (For more information, refer to “Widget” on page 107.) 2.
5. Select a Widget icon on the standby screen to launch its function. 䊳 Note: You can return a Widget icon to the Widget Bar simply by pressing, holding, and sliding the icon until it overlaps the Widget Bar. 6. Close the Widget Bar by pressing the left arrow tab. Returning Widgets to the Widget Bar 1. In Standby mode, press the right arrow tab on the left edge of the display. The Widget Bar slides open to the right and lists icons for those Widgets selected in the Widget settings screen.
• Switch to headset — Connects a Bluetooth device, such as a headset, in place of the phone’s earpiece and microphone. • Mute — Blocks sound going to the other party(ies) on the call. • Memo — Create and save a memo. • Messages — The Messaging menu appears in the display. (For more information, refer to “Messaging” on page 49) • End Call — Tap to end the current call. • Dialer — Allows you to dial another party, which the first call is put on hold.
Section 5: Understanding Your Contacts This section explains how to manage your daily contacts by storing their name and number in your Contacts. Contacts entries can be sorted by name. 2. Your Contacts List Your Contacts list can store up to 2000 entries, with each contact having up to five associated phone numbers, an Email address, and a picture ID. Each phone number can be up to 32 digits in length, including hard pauses. Contact names can be up to 32 characters in length.
Select the Name field. The 3X4 Keypad text entry screen appears in the display. • If desired, select another text entry screen. (For more information, refer to “Changing Text Entry Screens” on page 43.) 4. Enter a name or phrase to associate with the new Contact. (For more information, refer to “Entering Text” on page 43.) 3. Select a phone number field (Mobile, Mobile 2, Home, Work, or Fax) or the Email address (Email) field. The 3X4 Keypad text entry screen appears in the display.
10. If desired, select an identifying image selecting the photo ID field. You are given the option to take a photo or to use a current image. (For more information, refer to “My Images” on page 82.) 11. To save the new Contacts entry, press the Save soft key. Creating a new Contacts entry: 3. Select Add New Contacts. The New Contact screen appears in the display with the number you’re saving populating the Mobile field. 4.
Adding the number to an existing Contacts entry: 6. 7. 8. 10. Make any added changes you wish to the Contacts entry. (For more information, refer to “Editing an Existing Contact Entry” on page 37.) Select Update existing. The Contacts screen appears in the display showing your current Contacts list. 11. To save the Contacts entry, press the Save soft key.
4. Select the number you wish to store in your Contacts list. The associated Call Information screen appears in the display. 5. Press the Add To Contacts soft key. The Add To Contacts screen appears in the display showing the following options: • Add New Contacts — Lets you create a new Contacts entry. • Update Existing — Lets you add the selected number to an existing Contacts entry. For more information on saving the number, see “Saving a Number from a Call” on page 34.
1. In Standby mode, press the Menu soft key and select Contacts. The Contacts screen appears in the display with an alphabetical list of Contacts showing. 2. Select the Search field and enter the first few characters of the name of the contact as it appears in your Contacts list. Example: If you saved a contact name as “Amy Smith”, begin your search for that contact by pressing for “A”. Note: As you enter letters, the entry names of the closest matches (thus far) appear in the display. 3.
5. 6. To clear all numbers in the highlighted field, press and hold . When you’re finished editing the entry, press the Done soft key, then press the Save soft key. Adding Pauses to Contacts Numbers When you call automated systems (like banking services), you are often required to enter a password or account number. Instead of manually entering the numbers each time, you can store the numbers in your Contacts along with special characters called pauses.
• Wait — a hard pause (awaits input from you). • 2-Sec Pause — a two-second pause. 5. Select the pause option of your choice to enter the highlighted pause into your number sequence. 6. When you’re finished entering pauses, tap Done ➔ Save to save your changes to the number in your Contacts list. Add a Number or Email Address to an Existing Entry 1. Find the desired entry in the Contacts list. (For more information, refer to “Finding a Contacts Entry” on page 36.) 2. Tap the Edit soft key.
Speed Dial Numbers 4. You can assign and change Speed Dial numbers for Contacts entries. Assigning a Speed Dial Number 1. In Standby mode, tap the Dialer soft key, then tap the Favorites button ( ). The Favorites list appears in the display. 2. Select a Speed Dial number. The Contacts screen appears in the display. 3. Find and select a Contact entry. (For more information, refer to “Finding a Contacts Entry” on page 36.) A dot appears in the selected Contact’s check circle. Tap the Add soft key.
Removing Speed Dial Numbers 1. Use this option to remove a speed dial number in your Contacts list. 1. In Standby mode, press the Dialer soft key and tap . The Favorites screen appears. 2. Tap Remove, then tap the Contact Remove button ( then tap Remove again. ), Renaming a Contacts Group In Standby mode, press the Menu soft key and select Contacts. The Contacts screen appears in the display with an alphabetical list of Contacts showing.
2. Tap the Erase soft key. 3. Do one of the following: • From the list of Contacts, tap Erase, then tap the erase icon to the right of the contact you wish to delete, then tap Erase again. • From a specific Contact, tap Erase. The phone prompts you to confirm the deletion. Sending a Contacts Entry Use the Send Name Card option to send one or more selected Contacts entries to another, compatible phone or other device over a Bluetooth connection. 1.
Section 6: Entering Text This section details how to select the type of text entry screen (phone-style touch keypad, QWERTY touch keypad, or divided or full-screen handwriting recognition panel). This section also describes how to select the desired text entry mode when using the phone-style touch keypad or the QWERTY keyboard-style touch keypad.
• Handwriting full screen — Displays the full-screen handwritten text entry field. Both handwritten text and the recognized text appear in the same field. 2. Select QWERTY. The keyboard-style touch keypad appears and the display automatically rotates to show information in a wider, landscape format. Using the QWERTY keypad, you can type letters, numbers, punctuation, and other special characters into text entry fields or other applications simpler and faster than using the phone-style keypad.
Entering Text Using Handwriting Recognition Screens 45 1. Using a stylus, print your text in the handwriting entry field. The phone replaces your handwriting with printed text. 2. To enter letters, press 3. To enter numbers and symbols, press then print numbers and/or symbols. 4. To enter a space, press . 5. To move to a new line, press . 6. To delete text, press 7. When you are finished writing your text, press the Done soft key to save your writing. 8.
Tip: Using the QWERTY keypad or the Handwriting Recognition screens, also use 123 mode to enter numbers and symbols into your message simply by pressing the keys labeled with the symbols you want. Changing QWERTY Keypad Text Entry Mode 䊳 • Symbols — Using the phone keypad, enter a symbol into your message by pressing the key labeled with the desired symbol (indicated by or on keys). The current text entry mode (T9 Word, abc, Abc, ABC, 123, or Symbols) is indicated on the touch keys.
– Pause briefly and the displayed letter is accepted and inserted into your message. – Press to enter a space and press to enter a period. • For practice, enter the word “Samsung” by pressing each of the following keys only once: S A M S U N T9 Word recognizes that the most commonly used word for the numeric sequence you just entered is “Samsung.” If more than one word shares the same numeric sequence, T9 Word provides the most commonly used word. Note: To enter a space, press .
䊳 While composing a text message, enter symbols by using one of following keypads: • Using the phone keypad: – Press the Symbols soft key. The first of four symbol screens appears in the display. – Use the Prev and Next soft keys to page through the other symbols, if desired. – Press the key labeled with the symbol that you wish to enter. – Repeat these steps to insert additional symbols into your message. • Using the QWERTY keypad: – Press or .
Section 7: Messaging This section explains how to create, send, receive, and view different types of messages. This section also describes the features and functionality associated with messaging. Creating and Sending New Messages This section guides you through procedures for creating and sending text and picture messages. Creating and Sending a Text Message 1. In Standby mode, press the Messaging soft key, then select Send Message ➔ Text Message.
• To select a phone number from a Recent Call as a recipient, press the Recent Calls soft key. The Calls screen appears in the display. – If desired, press the down arrow key in the upper right corner of the screen, then select All, Incoming, Outgoing, or Missed calls. – Select individual calls or select Select All. Check marks appear in the check boxes for the selected calls. – Press the Add soft key. You are returned to the To list. 3.
4. If desired, select the Subject field. The phone-style touch keypad screen appears in the display in Abc mode. You are returned to the Picture Msg screen which is populated with the selected photo in the Picture field. 8. If desired, you can add a sound file to accompany the picture by selecting the Sound field. The My Sounds screen appears in the display listing available sound files. • To add an existing sound file, select the preferred file and press the Send soft key.
Tip: You can send a Picture message to up to ten recipients. Enter each recipient’s address or phone number in a separate To field of the Picture Msg screen. 1. In Standby mode, press and hold the Camera key ( The camera viewfinder screen appears in the display. 2. Using the display as a viewfinder, when the image that you wish to send appears in the display, press the Camera key ( ) to take a picture. Press the Send soft key.
5. 6. 7. • To use pre-composed text, press the Add Quick Text soft key. If desired, repeat steps 3 and 4 for the Text field. To add a video clip to the message, select the Video field. You are prompted to Take a Video or to add a video clip from the My Videos folder. • To activate the phone’s camcorder and record a new video clip, select Take Video. (For more information, refer to “CameraCamcorder” on page 63.) Once you’ve recorded a video clip, press the Send soft key.
Note: For more information about using the camcorder feature in your phone, see “Camera-Camcorder” on page 63. 6. Press the Send soft key. If necessary, the device resizes your picture for sending, then the Video Msg screen appears in the display showing the To list. Address your message as you would a Text message (see “Creating and Sending a Text Message” on page 49), with one addition: • To send this message to your Online Album, press the Online Album soft key. You are returned to the To list. 8.
display and scrolls slowly to the end of the message. (For more information, refer to “Message Settings” on page 58.) • If Auto View is set to Off — An alert sounds (unless turned off) and a New Message notification appears in the display along with the closed envelope icon ( ).
Carrier’s voicemail system. A recorded message prompts you for a password. 2. Enter your password, then follow the recorded prompts, to listen to your voice message(s), change administrative options, and so on. Tip: You can also access your voice mail by selecting an entry in the Voicemail folder. Message Folders Inbox Received messages of all types (except Voicemail) are stored in the Inbox. 1. In Standby mode, press the Messaging soft key, then select Inbox, to open the Inbox folder. 2.
1. 2. 3. 57 In Standby mode, press the Messaging soft key, then select Outbox. A list of your outgoing messages appears in the display. To delete one or more messages, press the Erase soft key, select the message(s) to be deleted, then press the Erase soft key again. To view a message, select it, then do one of the following • To resend a message to the original recipient(s), press the Resend soft key. • To forward the message to other recipients, press the Forward soft key.
Select an option to perform the function for that option. Voicemail New voice messages in your voice mailbox are logged in the Voicemail folder of the Messaging menu. Open the Voicemail folder to view the Callback # (if available), Urgency, and other details of new voicemail messages. 1. In Standby mode, press the Messaging soft key, then select Voicemail. A Voicemail status screen indicating the number of new messages in your voice mailbox, their urgency, and any callback numbers appears in the display.
– Automatically erase/or prompt you to delete the oldest read messages after message memory is full and new messages are received. • Quick Text — Lets you change pre-composed text or compose text for addition to your outgoing messages. • Voicemail Number — Lets you update your Voicemail access number. • Keypad/Entry Mode — Lets you set the following: – Default Keypad (3X4 Keypad, QWERTY, Handwriting box, Handwriting full screen) for entering message text.
Section 8: easyedgeSM This section explains the easyedgeSM features where users can download multimedia, applications, games, and check news and sports. 2. Tap the Left navigation soft key to select the my stuff tab. You can use the navigation soft keys to browse or search for, purchase, and download applications. 3. Tap the OK soft key to select an application on your phone that you wish to launch.
Section 9: Browser This section outlines how to launch Browser, how to navigate to other pages on the web, and how the keys on the keypad are used with the web application. Additionally, links to other sites are briefly discussed. The Browser screen appears in the display in landscape mode. A list of categories (each representing one or more web sites) appears in the display. Browser Features With Browser, you can conveniently surf the web and download ringtones and wallpapers using your phone.
• Numbered options (some may not be numbered). • Simple text. You can act upon options or links by selecting them. Using Links Links have several purposes, such as jumping to a different page, to a different site, or even initiating a phone call. Links are shown inside of brackets ([ ]). You can normally select a link. Favorites — Displays and lets you select from a list of web sites you have saved as your favorites.
Section 10: Camera-Camcorder Use your Samsung phone to take full color digital pictures and videos, display them on your phone’s vivid color display, and instantly share them with family and friends. It’s fun, and as easy to use as a traditional point-and-click camera or camcorder. This section explains how you can do the following: • Take pictures and videos with your phone’s built-in digital cameracamcorder. • Send and receive pictures and videos taken with your phone’s cameracamcorder.
5. To exit the Camera feature, press . Tip: You can change a number of the camera’s settings to suit particular uses for your pictures. For more information, refer to “Camera Options” on page 68 Taking Multi Shot Pictures When taking pictures of moving subjects or subjects you cannot pose, such as children and pets, the camera’s Multi Shot mode simplifies the process of taking multiple pictures in quick succession.
Press the Camera key ( ) when the image that you wish to capture appears in the display. The camera takes multiple pictures in quick succession (Multi) or one each time you press the Camera key ( ) (Mosaic), then the multiple-photo screen appears in the display. • To discard the pictures, press the Erase button. • To set a picture as the Standby mode screen wallpaper, press the Set as Wallpaper button.
Camera Screen Buttons Changes the Camera-Camcorder mode to Camcorder. Lets you set the Camera’s Shooting Mode to Single, Multi, Mosaic, or Frame. Lets you set the resolution of your photos between 3Megapixels – 0.3Mmegapixels and Picture ID. Button/Icon Display 1. In camera mode, with the buttons and icons appearing in the display, tap the screen once to hide the Camera icons, then press the icon bar again to hide the Camera buttons. 2.
Camcorder Screen Buttons Changes the Camera-Camcorder mode to Camcorder. Lets you set the Camcorder’s Recording Mode to Normal or Video Msg. Lets you set the Camcorder’s resolution to 320x240 or 176x144 (pixels). Lets you select values for Quality, Self Timer, White Balance, and Effects. Lets you set the Camcorder’s Flash to On, Off, or Auto. Not supported by the Camcorder. Lets you set the Camcorder to brighten or darken your videos. Lets you access the My Videos folder. 67 Button/Icon Display 1.
Camera Options The Camera Options let you adjust the default camera settings to suite available lighting, the subject of the photo, or the purpose of the photo. To access Camera Options, do the following: 1. In Standby mode, press and hold the Camera key ( The camera viewfinder screen appears in the display. 2. Select the any of the following buttons: ).
When you press the Camera key ( ), the camera takes several pictures in rapid succession (Multi), or lets you take one picture after another (Mosaic). Frames Frames lets you temporarily apply one of the preloaded picture frames in your phone to characterize or enhance one or more pictures. Note: The None frame is a blank frame. 1. 2. In camera mode, press the Shooting Mode button, then select Frames. A pop-up menu of the available Fun Frames appears in the display. Select the Frame you wish to use.
1. In camera mode, press the Settings soft key, then select Camera Tab ➔ Self Timer. The following values appear in the camera screen: • Off • 3 Seconds • 5 Seconds • 10 Seconds 2. Select the desired Self Timer option. If you select 3, 5, or 10, the Self Timer icon appears in the camera screen in the display. When you press the Camera key ( ), the countdown • Daylight — Use this setting when taking pictures in full sun. • Cloudy — Use this setting when taking pictures in cloudy conditions.
• Sketch — Subjects and pictures appear as black and white outlines. • Negative — Subjects and pictures appear in inverted colors. • Sepia — Subjects and pictures appear in a brownish-gray hue. • B & W — Subjects and pictures appear in black and white. • Aqua — Subjects and pictures appear in an aqua hue. 2. Select the color effect of your choice. You’re returned to the camera viewfinder screen. previews your subject image with the measured exposure.
2. • On Select the automatic save setting of your choice. You’re returned to the camera viewfinder screen. Guideline Shows a cross hatch pattern in the view finder screen. In camera mode, press the Options soft key, then highlight Settings and select Guideline. The following options appear in the display: • Off • On 2. Select the viewfinder screen setting of your choice. You’re returned to the camera viewfinder screen. 1. 2. Brightness Brightness lets you temporarily lighten the pictures you take.
2. To Zoom in on a subject, press the Volume key down. 3. To Zoom out from a subject, press the Volume key up. The next time you press the Camera key ( ), the camera takes an enlarged picture according to your selected Zoom setting. • Video Msg — Record videos that are a maximum of 15 seconds long. The videos can be included in video messages. 2. Select the desired recording mode setting. The camcorder viewfinder screen appears in the display.
Settings — Camcorder Tab Quality You can affect how much your video is compressed, thereby reducing it’s overall size (not to be confused with the Size setting). In camcorder mode, press the Settings button, then select Camcorder Tab ➔ Quality. The following options appear in the display: • High • Normal • Economy 2. Select the quality setting of your choice. You’re returned to the camcorder viewfinder screen. • 3 Seconds • 5 Seconds • 10 Seconds 2. Select the desired Self Timer option.
• Fluorescent — Use this setting when recording videos under fluorescent lights. 2. Select the White Balance you wish to use. The camcorder viewfinder screen appears in the display with your selected White Balance applied. The next time you press the Camera key ( video. Effects Change the look of your videos with Color Effects. Choose from six available settings such as Gray, Negative, and Sepia. The selected color effect previews in the display before you take the picture.
2. Select the automatic save setting of your choice. You’re returned to the camcorder viewfinder screen. Start Sound Choose from two different sounds whenever you begin video recording. Aside from being a cool sound effect, Start Sound acts as an audible reminder that your camcorder has begun recording a video. In camcorder mode, press the Settings button, then select Common Tab ➔ Start Sound. The following Memory options appear in the display: • Off • Beep • Look Here! • 1,2,3! 2.
Zoom 4. Zoom lets you temporarily enlarge the pictures you take. Increasing the Zoom (1 – 9) enlarges your pictures or videos (0 is normal). 1. In camcorder mode, press the Volume key (on the left side of the phone) up or down. The horizontal Zoom scale appears in the display. 2. To Zoom in on a subject, press the Volume key down. 3. To Zoom out from a subject, press the Volume key up.
7. – Erase — Deletes the image from the My Images folder, provided the image is unlocked. – Move to Card — Transfer this image to an optional Memory Card. – Copy to Card — Save a copy of this image to an optional Memory Card. – Rename — Rename the currently displayed or highlighted picture. – Lock / Unlock — Lock the currently displayed or highlighted picture so that it cannot be deleted, or unlock the picture so that it can be deleted. – Print — Print the image on a Bluetooth-compatible printer.
Section 11: Music Player Music Player lets you play music files (such as, CMX, MIDI, MP3, AAC, AAC+, and eAAC+) stored on a Memory Card. Music Player Controls 1. This section describes your phone’s Music Player functions and key features associated with multimedia. Launches the Music Library menu. Accessing the Music Player Note: A microSD Memory Card must be installed for the Music Player to launch.
Plays all songs in the Playlist and then replays until you press Stop or Pause. Plays songs at random, that is, in no particular order. Plays songs in the listed order. 4. Progress bar — Indicates progress of playback. 5. Elapsed Time and Total Time — Show how many hours, minutes, and seconds of the music file have been played and shows how long the music file is in hours, minutes, and seconds. 6. Playback controls Mutes music file playback. Changes playback to next music file in playback list.
• Playlists — Lists any music file Playlist(s) you have created. • Artists — Lists all available recording artists names with music files stored on a Memory Card. • Albums — Lists all available album titles for music files stored on a Memory Card. 2. Select the music file group you wish to access. A list of music files appears in the display. 3. 4. Enter the first few characters of the file, Playlist, artist, or album you wish to find. (For more information, refer to “Entering Text” on page 43.) 5.
Section 12: Multimedia This section outlines your phone’s multimedia functions and key features associated with multimedia. Accessing Multimedia In Standby mode, press the Menu soft key, then select Multimedia. The following Multimedia sub-menus appear in the display: • Camera — Lets you launch and set up your phone’s camera. (For more information, refer to “Camera-Camcorder” on page 63) • Camcorder — Lets you launch and set up your phone’s camcorder.
4. To assign the selected picture as the Picture ID for a Contact, or as the Wallpaper for the Standby mode screen, press the Set as soft key. Press the More soft key. A pop-up menu containing the following options appears in the display: • Camera — Lets you take additional photos. • Erase — Deletes the selected image. • Move to card / phone — Lets you move the picture from the phone to a memory card or from a memory card to the phone.
5. To move a video from the phone to a Memory Card or from a Memory Card to the phone, press the Move soft key. 3. To delete one or more video clips from the My Videos folder, press the Erase soft key. 6. To take a new video, press the More soft key and select the Camcorder option. The camcorder view finder screen appears in the display. (For more information, refer to “Camera-Camcorder” on page 63) 4.
• Video Info — Displays information about the video, such as the video Name, creation Date and Time, Resolution, data Size, and the Duration. 6. To select another video for playback, press in the upper left corner of the screen. My Ringtones My Ringtones lets you assign ringtones (preloaded and downloaded) for calls, alerts, and as distinctive ringers for Contacts. 1. From the Multimedia menu, select My Ringtones. A list of ringtones appears in the display.
• Record New — Lets you record a new sound file. • Erase — Erases one or more sound files. • Lock/Unlock — Lets you protect the sound file from being deleted. Tip: You can also access My Sounds from: -A Set Alarm screen by selecting the Alarm Tone option, then pressing the My Sounds soft key. -The Edit Contact screen by selecting the Sounds soft key. 2. option and pressing the My Select a file. The Sound Player screen appears in the display, and the selected sound file begins to play.
2. Select Until Memory Full or Limit for Message. 3. Press the Erase soft key. The “Select to erase” screen appears in the display. 4. Select the voice memo you wish to erase, then press the Erase soft key. The Voice Memo screen appears in the display. Press REC, then start speaking. As it is recording the phone displays a countdown timer that shows the seconds remaining for the recording. • To pause the memo, press the Pause soft key. When a memo is paused, select Rec to continue recording. 4.
Section 13: Tools This section explains how to use your phone’s digital assistant functions to view today’s calendar, schedule events, set reminders, perform calculations, and more. Accessing Your Phone’s Tools To launch the Tools menu: 䊳 In Standby mode, press the Menu soft key, then select Tools. The Tools menu appears in the display. Voice Service Your device includes state-of-the-art voice recognition software that lets you use your voice to dial numbers, access your Contacts list, and open Tools.
• Send Picture — Lets you access Create Picture Message. • Lookup — Lets you find a Contact by name and review the Contact’s information. • Go to — Lets you access the following list of your phone’s features and functions: – Contacts – Calls – Multimedia – Messaging – easyedgeSM – Camera – Tools – Music Player – Calendar – Settings – Alarm – Calculator • Check — Lets you say a single command (such as “Status”) to verify your phone's: Status, Signal Strength, Network, Battery, or My Phone Number. 2.
3. To save your selection, press the OK soft key. To discard the new setting, press . You are returned to the Voice Settings menu. Adaptation If you regularly have trouble with Voice Service not recognizing the commands, names, and/or numbers you say, try adapting Voice Service to your voice. Adapting can improve the accuracy of Voice Service responses, especially for people with strong regional accents. Note: After you adapt Voice Service, it is customized to your voice, and your voice only.
1. 2. From the Tools menu, select Voice Service ➔ Voice Settings ➔ Adaptation ➔ Reset Voice. The phone prompts you to confirm voice adaptation reset. Press the Yes soft key to reset your voice adaptation, or press the No soft key to keep your voice adaptation. Modes Modes lets you specify whether Voice Service is to read prompts and/or on-screen text to you when you are using your phone’s menus. From the Tools menu, select Voice Service ➔ Voice Settings ➔ Modes.
Bluetooth Turn Bluetooth On Bluetooth is a short-range wireless communications technology capable of exchanging information over a distance of about 30 feet without requiring a physical connection. 1. From the Tools menu, select Bluetooth. The Bluetooth screen displays. Unlike infrared, you don't need to line up the devices to beam information with Bluetooth. If the devices are within a range of one another, you can exchange information between them, even if they are located in different rooms. 2.
Add New Device Searching for Available Bluetooth Devices selected device’s name, Type, Status, and Address. 5. Return to the Bluetooth screen by pressing the OK soft key. 1. From the Tools menu, select Bluetooth. The Bluetooth screen displays. 6. Press, hold, and slide the identified icon to overlap the SEARCH button. You are prompted to enter the passkey or PIN for the selected device. 2. Place the Bluetooth device you want to pair with your device in discoverable mode.
Paired Icons The Bluetooth screen shows the icons for Bluetooth wireless technology devices paired with your handset. 1. From the Tools menu, select Bluetooth. Icons for registered Bluetooth devices appear in the display. Connecting to a Bluetooth Device 1. In the Bluetooth screen, press, hold, and slide the icon for the preferred device to overlap the SEARCH button. The SEARCH button and the device icon flash and are highlighted in blue to indicate the connection is complete. 2.
• Discovery Mode — Allows other Bluetooth devices to see your device as accessible. Select On for other devices to see your device, or Off for no visibility. • Address — Shows the Bluetooth Address of your phone. (This address is not changeable.) 2. To save your changes, press the Save soft key. Press to discard your changes and return to the Bluetooth screen. • Left/Right buttons — Moves the date and screen back/ahead one month per keypress. • Goto soft key — Select a particular date. Add a New Event 1.
For additional New Event options, press the Set Details soft key. • End Date — Populated with highlighted Calendar date. Select the date this event ends. • End Time — Populated with a time one half-hour later that Start Time. Select the time this event ends. • Details — Add details about the event. • Location — Add location of the event. • Alarm Tone — Select a ringtone from My Ringtones, buy a ringtone on-line, or select a sound file from My Sounds. When you select a ringtone or sound, it plays.
Memo Pad Create notes and store them in Memo Pad. Notes that you create in Memo Pad can’t be prioritized or assigned an alert. Return to Memo Pad anytime to review and edit your notes. Create a Memo 97 1. From the Tools menu, select Memo Pad. A list of any stored Memos appears in the display. 2. To add a Memo, press the New Memo soft key. A blank Memo screen appears in the display. 3. Enter text for this Memo. (For more information, refer to “Entering Text” on page 43.) 4.
Note: The Alarm Clock doesn’t function when the phone is turned off. If the time for an alarm that was set for Once has elapsed while the phone is off, the alarm sounds at the specified time on the next day. Set an Alarm 1. From the Tools menu, select Alarm Clock. The Alarm screen appears in the display, listing any currently set alarms. 2. Press the New Alarm soft key. The following Alarm options appear in the display: • Alarm Name — Populated with the default name, Alarm.
Note: If the alarm is set to repeat on one or more days, the alarm icon remains in the top of the display. If the alarm was set as a once only alarm (no repeat day selected), the alarm icon disappears from the top of the display. Turn Off an Alarm 1. From the Tools menu, select Alarm Clock. The Alarm screen appears in the display, listing any currently set alarms. 2. Press the Off button on the Alarm you wish to turn off. Erasing an Alarm 1. From the Tools menu, select Alarm Clock.
Setting a World Clock The default home clock is set to the time in London, England and is labeled “London”. To change this or another World Clock setting, do the following: 1. From the Tools menu, select World Time. A list of your current World Clocks appears in the display. Enable Daylight Savings Time (DST) 1. While viewing the World Time map, press the DST ( soft key to toggle between standard time and daylight savings time. ) 2. Press the Add soft key to accept the highlighted setting.
Selecting Your 2nd Clock Your 2nd Clock and your Home Clock both appear in the Clock widget when you move it from the Widget Bar to the standby screen. By changing your 2nd Clock, you can quickly and easily keep track of the time in a new city and at home. (For more information, refer to “Widget” on page 107.) 1. From the Tools menu, select World Time. A list of your current World Clocks appears in the display. 2. Press the Set as 2nd Clock soft key. 3.
Stop Watch You can use this function to set a stop watch. 1. From the Tools menu, select Stop Watch. The Stop Watch screen appears in the display. 2. To start the Stop Watch count, press the Start soft key. 3. To record succeeding event/ lap times, press the LAP soft key at the start of each succeeding event/lap to record the completion time for the previous event/lap. You can record up to eight event/lap times. 4. To stop the Stop Watch count, press the Stop soft key. 5.
Currency — Reviewing/Editing Exchange Rates • Area • Temperature Using Converters To convert a currency, length, weight, volume, area, or temperature, do the following: From the Tools menu, select Converter. The following list of converters appears in the display: • Currency • Length • Weight • Volume • Area • Temperature 2. Select the conversion feature you wish to use. 1. 3. Press the down arrow key and select the units to be converted from. 4.
Currency — Adding Exchange Rates You can use the Currency Converter to convert from and to obscure currencies by adding exchange rates for these currencies. To add a currency and its exchange rate to the Currency Converter, do the following: 1. From the Tools menu, select Converter ➔ Currency. 2. Press the View Rates soft key. A list of exchange rates appears in the display. 3. Use the left and right arrow buttons at the top of the list to display the base currency for the new exchange rate. 7.
4. Press the Erase Rates soft key. The Erase screen appears in the display. Note: The Erase Rates soft key is undefined for preloaded Exchange Rates. This prevents you from erasing them. 3. Tap the entry field to the left of the pull-down menu and enter the number using the keypad. 4. Press Done. The equivalent weights for each measurement appear in the display. 5. Press Reset to clear the numeric fields. 5.
5. Press Reset to clear the numeric fields. Temperature 2. Select the Bill field and enter the total amount of the bill. 3. Select the Tip field and enter a tip percentage. 1. From the Tools menu, select Converter ➔ Temperature. 4. 2. From the pull-down menu, select the type of temperature measurement you want to convert. Select the # Paying field and enter the number of persons paying using the keypad. 5. 3.
Section 14: Changing Your Settings This section explains how to customize your phone to suit your needs and preferences. Settings Menu 䊳 To access the Settings menu, select Menu ➔ Settings. The Settings menu appears in the display. Location This function identifies your location to the network via the Global Positioning System (GPS). You can set this function for continuous operation or to operate only in the event that you dial 911.
• YouTube • MSNBC • Access Hollywood • Send Message • Top 5 Contacts • Mini Player • Images • Calculator • Clock • Calendar • Date • Alarm • Sketchpad • Help 2. To enable/disable a particular widget, select the associated option in the Widget screen. A check mark appears in/ disappears from the option’s check box. 3. To enable/disable all available widgets, select Select All/ Unselect All. A check mark appears in/disappears from all the options’ check boxes. 4. To save your new settings, select OK.
2. Press the weather display, and the detailed AccuWeather information pop-up appears in the display. 3. To change the AccuWeather settings, press the Settings icon in the lower left corner of the pop-up. The AccuWeather Settings pop-up appears in the display. 4. To change the location of the weather, press the Location field. A Location search pop-up appears in the display. 5. Press the Location field. A text entry screen appears in the display. 6. Enter the new location name and press Done.
Display Settings Using the Display menu, you can set the menu style, set the Standby mode animation, customize the backlight settings, and more. From the Settings menu, select Display Settings. The following options appear in the display: • Wallpaper — Lets you choose the picture(s) that display(s) on your phone when in Standby mode. • Banner — Lets you create your own personalized greeting that appears in the display when your phone is in Standby mode.
Backlight Time You can set the backlight for your display to remain on or off or to remain on for a specified period of time. Note: Prolonged backlight use drains your battery faster. From the Settings menu, select Display Settings ➔ Backlight ➔ Backlight Time. The following options appear in the display: • 7 Seconds • 15 Seconds • 30 Seconds • Always On (this setting uses much more power than the timed settings) • Always Dim — Display is always on, but at reduced brightness. 2.
3. Select the preferred Volume setting: • High • Low/Medium • Vibrate only • Medium/High • Low • Alarm only • Medium • 1 beep • Silence All 4. To preview your new setting, press the Play soft key. To end the preview, press the Stop soft key. 5. To retain your setting, press the Set soft key. Your are returned to the Volume screen. 6. To save your new settings and return to the Sound Settings menu, press the OK soft key.
Alerts You can set your phone to sound an alert whenever you enter or leave your service area, connect or disconnect a call, as well as other options. 1. From the Settings menu, select Sounds Settings ➔ Alerts. The following Alerts options appear in the display: • Minute Beep — Sounds an alert ten seconds before each elapsed minute of a call. • Roaming — Sounds an alert when you leave your home service area during a call. • Call Connect — When you make a call, an alert sounds when the call is answered.
• Any Key — Press any key except the or Left soft key to answer an incoming call. • Send Key — Press to answer an incoming call. Tip: You can set your phone to answer calls automatically, without any input from you. (For more information, refer to “Auto Answer” on page 114) 2. Select the desired call answering method and press the OK soft key to save your selection. Call Alert From the Settings menu, select Call Settings ➔ Call Alert.
• Off — Disables automatic re-dialing of numbers • Every 10 Seconds — Phone automatically re-dials a number every 10 seconds • Every 30 Seconds — Phone automatically re-dials a number every 30 seconds • Every 60 Seconds — Phone automatically re-dials a number every 60 seconds 2. Select the desired setting and press the OK soft key to save your selection. TTY Mode Your phone is fully compatible with TTY equipment used by those who are hearing impaired.
Mode. The following options appear in the display: • On • Off 2. Select the desired hearing aid mode setting and press the OK soft key to save your selection. Phone Settings Airplane Mode When set to On, Airplane Mode disables all radio functions of your phone. This prevents you from receiving or making calls (except emergency calls), but allows you to use other features (such as the camera and the Tools) safely in sensitive environments, such as on board an aircraft.
Screen Lock.The following options appear in the display: • On — The touch screen is locked when the time set for the backlight has passed. • Off — The touch screen remains active whether or not the backlight is on. 2. Select the desired setting and press the OK soft key to save your selection. 3. If the On option is selected, pressing and holding the LOCK key ( ) activates the touch screen. If the Off option is selected, the touch screen is always activated unless you press the LOCK key ( ).
Change Lock Code The default lock code for your phone is generally the last four digits of your phone number. It is advisable to change the default lock code to a secret code for security purposes. 1. From The Security sub-menu, select Change Lock Code. You’re prompted to enter the new lock code. 2. Enter the new lock code and press the OK soft key. You’re prompted to re-enter the new lock code for verification. 3. Enter the new lock code again and press the OK soft key. Your new Lock Code is stored.
Tip: This feature can be valuable during emergency situations, such as, a home invasion. Disabling the Emergency call alert tone can prevent a home invader from locating you by means of that tone. From The Security sub-menu, select Emergency Ringback. The following options appear in the display: • On — Your phone plays an audible alert tone during Emergency calls. • Off — Your phone does not play an audible alert tone during Emergency calls, but does vibrate. 2.
– Incoming — Lets you Allow All incoming Picture and Video messages or Allow None (No incoming Picture and Video messages). – Outgoing — Lets you Allow All outgoing Picture and Video messages or Allow None (No outgoing Picture and Video messages). • IP Connection — Lets you Allow All data connections or Allow None (No data connections). 2. Select the desired Restriction setting(s). NAM Selection The Network menu allows you to select NAM (Number Assignment Module) settings for your phone.
– Press the OK soft key to save your date setting. • For Set Time, the Set Time screen appears in the display. – Use the up and down arrow buttons to select the current time. – Press the OK soft key to save your time setting. Important!: For this calibration process to complete successfully, it is recommended that you use the stylus to accurately set the new calibration touch points. 1. From the Settings menu, select Phone Settings ➔ Calibration. The Calibration screen appears in the display.
• No Connection — This option blocks your r520 from connecting with a PC. 2. Select the preferred PC Connection type. Gesture The Gesture settings let you enable or disable specific reactions to your movements of the phone. From the Settings menu, select Phone Settings ➔ Gesture. The following options appear in the display: • Mute Event — When set to On (the default value), you can mute an incoming event by turning the phone face down.
Card Memory Usage Card Memory Usage lets you review your usage of your Memory Card. From the Settings menu, select Memory Manager ➔ Card Memory Usage. The Card Memory Usage screen appears in the display showing the following information: • Total Used memory usage • Available unused memory • Images memory usage • Videos memory usage • Music memory usage • Other memory usage 2. Press the OK soft key to return to the Memory Manager menu. 1. • Music Select the desired file type.
3. Select the desired option. A list of all files in the related folder appears in the display. Files are listed by name, and each file entry shows the name of each file. To erase files, do the following: • Press the Erase soft key. The Select to erase screen appears in the display. • Select the check box for a file you want to erase to mark the file for erasure. (Press the Select All check box to mark all files for erasure.) • Press the Erase soft key.
• Select the check box for a file you want to erase to mark the file for erasure. (Press the Select All check box to mark all files for erasure.) • Press the Erase soft key. You are prompted to confirm erasure of the selected file(s). 5. To move files to Phone Memory, do the following: • Press the Move soft key. The Select to move screen appears in the display. • Select the check box for a file you want to move to mark the file for removal to Phone Memory.
Section 15: Toneroom Toneroom is a pre-loaded application that lets you access your Wireless Carrier’s on-line source for real music ringtones. Accessing Toneroom 䊳 In Standby mode, press the Menu soft key, then select Toneroom. The Tone Room home page appears in the display. Managing Your Tones 䊳 In the Tone Room home page, selet the My Tones tab. The My Tones page appears in the display. For more information about Tone Room, contact your Wireless Provider.
Section 16: Phone Info This section explains Phone Info options that let you identify the hardware and software versions of your phone and let you identify the phone number assigned to your phone. Phone Number This option causes the Phone Number screen to appear in the display and show the ten-digit number assigned to your phone by your Wireless Provider. 1. 2. In Standby mode, press the Menu soft key, then select Phone Info ➔ Phone Number.
Section 17: Health and Safety Information This section outlines the safety precautions associated with using your phone. These safety precautions should be followed to safely use your phone. Health and Safety Information Exposure to Radio Frequency (RF) Signals Certification Information (SAR) Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.
contains no metal and that positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The FCC has granted an Equipment Authorization for this mobile phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. The maximum SAR values for this model phone as reported to the FCC are: phone. Additional product specific SAR information can also be obtained at www.fcc.gov/cgb/sar.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR HORIZONTAL OR FLOOR MOUNT POSITION. Consumer Information on Wireless Phones The U.S.
can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radio frequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.
repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day.
questions about the effects of exposure to radio frequency energy (RF). FDA has been a leading participant in the World Health Organization international Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues.
• If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna. Again, the scientific data do not demonstrate that wireless phones are harmful.
Do wireless phone accessories that claim to shield the head from RF radiation work? Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone.
• Environmental Protection Agency (EPA): http://www.epa.gov/radiation/ • Occupational Safety and Health Administration's (OSHA): http://www.osha.gov/SLTC/radiofrequencyradiation/index.html • National Institute for Occupational Safety and Health (NIOSH): http://www.cdc.gov/niosh/homepage.html • World Health Organization (WHO): http://www.who.int/peh-emf/ • International Commission on Non-Ionizing Radiation Protection: http://www.icnirp.de • Health Protection Agency: http://www.hpa.org.
6. 7. Dial sensibly and assess the traffic; if possible, place calls wireless assistance number when necessary. If you see a to plan calls when your car will be stationary. If you need to broken-down vehicle posing no serious hazard, a broken make a call while moving, dial only a few numbers, check traffic signal, a minor traffic accident where no one the road and your mirrors, then continue.
Prolonged exposure to loud sounds (including music) is the most common cause of preventable hearing loss. Some scientific research suggests that using portable audio devices, such as portable music players and cellular telephones, at high volume settings for long durations may lead to permanent noise-induced hearing loss. This includes the use of headphones (including headsets, earbuds, and Bluetooth or other wireless devices).
National Institute for Occupational Safety and Health (NIOSH) American Academy of Audiology 11730 Plaza American Drive, Suite 300 Reston, VA 20190 Voice: (800) 222-2336 Email: info@audiology.org Internet: http://www.audiology.org National Institute on Deafness and Other Communication Disorders National Institutes of Health 31 Center Drive, MSC 2320 Bethesda, MD 20892-2320 Email: nidcdinfo@nih.gov Internet: http://www.nidcd.nih.gov/ 395 E Street, S.W.
As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position (held to your ear with the antenna pointing over your shoulder if you are using an external antenna). Using Your Phone Near Other Electronic Devices Most modern electronic equipment is shielded from radio frequency (RF) signals.
The wireless telephone industry has developed a rating system for wireless phones, to assist hearing device users find phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label located on the box. The ratings are not guarantees. Results will vary depending on the user's hearing device and hearing loss.
The HAC rating and measurement procedure are described in the American National Standards Institute (ANSI) C63.19 standard. Other Medical Devices If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch your phone off in health care facilities when any regulations posted in these areas instruct you to do so.
Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers. Restricting Children's access to your Phone To make an emergency call: FCC Notice 1. If the phone is not on, switch it on. 2.
Cautions Any changes or modifications to your phone not expressly approved in this document could void your warranty for this equipment, and void your authority to operate this equipment. Only use approved batteries, antennas and chargers. The use of any unauthorized accessories may be dangerous and void the phone warranty if said accessories cause damage or a defect to the phone. Although your phone is quite sturdy, it is a complex piece of equipment and can be broken.
Understanding How Your Phone Operates Your phone is basically a radio transmitter and receiver. When it's turned on, it receives and transmits radio frequency (RF) signals. When you use your phone, the system handling your call controls the power level. This power can range from 0.006 watts to 0.2 watts in digital mode. Maintaining Your Phone's Peak Performance For the best care of your phone, only authorized personnel should service your phone and accessories. Faulty service may void the warranty.
• If you use the phone near the network's base station, it uses less • Misuse or use of incompatible phones, batteries, and charging devices power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator. • Follow battery usage, storage and charging guidelines found in the user’s guide. • Battery charging time depends on the remaining battery charge and the type of battery and charger used.
• Do not crush, puncture or put a high degree of pressure on the battery • Do not store the phone in cold areas. When the phone warms up to its as this can cause an internal short-circuit, resulting in overheating. • Dispose of used batteries in accordance with local regulations. In some areas, the disposal of batteries in household or business trash may be prohibited. For safe disposal options for Li-Ion batteries, contact your nearest Samsung authorized service center. Always recycle.
Section 18: Warranty Information Standard Limited Warranty What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original purchaser ("Purchaser") that SAMSUNG's Phones and accessories ("Products") are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase and continuing for the following specified period of time after that date: Phone 1 Year Batteries 1 Year Leather Case 90 Days Hols
facility in an adequate container for shipping, accompanied by Purchaser's sales receipt or comparable substitute proof of sale showing the date of purchase, the serial number of Product and the sellers' name and address. To obtain assistance on where to deliver the Product, call Samsung Customer Care at 1-888-9874357. Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY.
End User License Agreement for Software IMPORTANT. READ CAREFULLY: This End User License Agreement ("EULA") is a legal agreement between you (either an individual or a single entity) and Samsung Electronics Co., Ltd. for software owned by Samsung Electronics Co., Ltd. and its affiliated companies and its third party suppliers and licensors that accompanies this EULA, which includes computer software and may include associated media, printed materials, "online" or electronic documentation ("Software").
5. UPGRADES. This EULA applies to updates, supplements and add-on components (if any) of the Software that Samsung may provide to you or make available to you after the date you obtain your initial copy of the Software, unless we provide other terms along with such upgrade. To use Software identified as an upgrade, you must first be licensed for the Software identified by Samsung as eligible for the upgrade.
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
13. APPLICABLE LAW. This EULA is governed by the laws of TEXAS, without regard to conflicts of laws principles. This EULA shall not be governed by the UN Convention on Contracts for the International Sale of Goods, the application of which is expressly excluded. If a dispute, controversy or difference is not amicably settled, it shall be finally resolved by arbitration in Seoul, Korea in accordance with the Arbitration Rules of the Korean Commercial Arbitration Board.
Phone: 1-888-987-HELP (4357) ©2009 Samsung Telecommunications America. All rights reserved. No reproduction in whole or in part allowed without prior written approval. Specifications and availability subject to change without notice.
Index A Accessing Your Phone’s Tools 88 Airplane Mode 116 Alarm Clock 97 Set an Alarm 98 Turn Off the Alarm 99 When an Alarm Sounds 98 B Battery Charging 4 Low Battery Indicator 5 Removal 6 Travel Adapter 5 Bluetooth Add New Device 93 Settings 94 Turn On/Off 92 Browser 61 C Calculator 101 Calendar 95 Call Functions Adjusting the Call Volume 22 Answering a Call 21 Call Log 22 Making a Call — Number Entry Dialing 18 Making a Call — Speed Dialing 19 Making a Call — Voice Dialing 20 Call Settings Auto Answer
E Emergency Calls 18 Entering Text 43 Entering Numbers 47 Entering Symbols 47 Using T9 Mode 46 Erase voice memos 87 F File Save Options 123 Formatting a Memory Card 125 Formatting a microSD Card 125 G Gallery, photo 77 Getting Started Activating Your Phone 6 Understanding this User Manual 4 Voicemail 7 H HAC 140 Handwriting Recognition 44 Health and Safety Information 128 I Icon Glossary 127 157 Image Shuffle Wallpaper 110 In-Use Menu 30 K Key Tone 113 L Language 116 Lock Mode 14 M Making a Call Num
P Personal Organizer Voice Memo 86 Phone Command Keys 11 Display Screen 12 Display Screen Icons 13 Features 9 Modes 13 View,Closed 9 Phone Info Icon Glossary 127 Phone Number 127 Version 127 Phone Memory Usage Info 123 Phone Number 127 Phone Safety 139 Phone Settings Airplane Mode 116 Language 116 NAM selection 120 Set Time 120 System Select 120 Photos Sending 78 Picture (Pic) Message 50 Picture Messages Send in Camera Mode 51 Q Quality, pictures 69 Quality, videos 74 QWERTY Keypad 43 R Receiving New Mes
T Taking pictures and videos 63 Text Conventions 4 Text Entry Mode 45 Changing 45 Text message 49 Text Modes Changing 45 Tip Calculator 106 Tip, description 4 Tools Alarm Clock 97 Bluetooth 92 Calculator 101 Calendar 95 Converter 102 Memo Pad 97 Stop Watch 102 Tip Calculator 106 World Time 99 Tools Menu Accessing 88 T-Ratings 141 TTY Mode 115 159 U UL Certification 129 Understanding Your Contacts Adding a New Contact Entry 32 Deleting a Contact Entry 41 Editing an Existing Contact Entry 37 Finding a Conta