User manual

21
Before Using the Tablet
SH-05G_E_02.fm
[21/29]
3
In the conversion candidates field, select “文字”
1 Range reduction/Range enlargement
Reduce/Enlarge the range of characters to convert.
Displayed only when available.
2 Close
Close the conversion candidates field.
3 Conversion candidates field
Touch one of conversion candidates to enter.
If you set an Internet conversion engine, [Net conv] is
displayed. Touch it to display conversion candidates
searched by the conversion engine on the Internet.
4 Determine
Determine the conversion.
5 Predictive candidates
Predictive candidates are displayed.
6 Conversion candidates
Conversion candidates are displayed.
7 Katakana and alphabet
Katakana and alphabet conversion candidates are
displayed.
■ Wildcard prediction
Conversion candidates are predicted according to the number of
the entered characters and appear.
Enable [Wildcard prediction] in advance (nP. 20 “Conversion”).
This function is available in the Hiragana/Kanji input mode and
the Half Alphabet input mode.
Example: When entering “アナウンス”
1
In the character entry screen, enter “あな”
2
[S]/[S]/[S]
: Each time you touch [S], [*] is entered and the predictive
candidates appear according to the number of characters.
3
In the conversion candidates field, select “アナ
ウンス”
■ Inputting with kuten codes
You can use four-digit kuten codes assigned to each character for
entering kanji, hiragana, katakana, symbol, alphanumeric
characters, etc.
1
In the character entry screen, slide the input
mode switching key up/[Character Code]
2
Input a kuten code
: After the fourth digit is entered, the corresponding character
appears.
: After the fourth digit is entered, the input mode is switched to
the previous one.
■ Inputting with voices
You can enter characters with voices.
1
In the character entry screen, [T]/[Input UI]/
[Voice Input]
: Alternatively, slide [T] to the right while the QWERTY
keyboard is used or slide [T] down while the 12 keyboard is
used to switch to the voice input.
2
Speak at the microphone
■ Editing characters
You can perform operations such as cutting, copying or pasting by
selecting the entered characters.
1
Touch and hold the entered characters
2
Edit the characters
: To specify the selection range: Drag [d]/[e] or [b]/[c]
: To display the history of cut and copied characters: [T]/
[Quote apps]/[Copy History SH]
1 Select all
Select all the entered characters.
2 Cut
Cut the selected characters.
3 Copy
Copy the selected characters.
4 Paste
Paste the cut or copied characters.
Alternatively, touch and hold the character entry field/
[PASTE] to paste them.
Touch and hold the character entry field/
[CLIPBOARD]/select characters to enter to paste them
from the history.
In the following cases, the voice input may not work properly.
 When the voice is too loud
 When the surrounding noise is big
 When the phonation is not clear
 When the phonation is not natural
 When the pronunciation is too fast
 When any key is pressed or the microphone is touched
Up to 10 history items of cut and copied characters can be
saved.
If the number of history items of cut and copied characters
exceeds the maximum number to be saved, they are deleted
from the oldest one.
SH-05G_E.book 21 ページ ２０１５年７月１５日 水曜日 午後１時４５分