User manual

26
Before Using the Tablet
SH-05G_E_02.fm
[26/29]
1
Drag the status bar down with your two fingers
at the same time
: Alternatively, touch and hold [}] to display the status panel.
2
Use the status panel
1 Function button
Make settings for use of the manner mode, Wi-Fi
function, location information, etc. Touch [Customize] to
rearrange, add and delete the function buttons.
･ If you touch [Location], the confirmation screens for the
use of location information are displayed. The mode to
be set may differ depending on whether you select
[DISAGREE] or [AGREE] (nP. 70 “Location
services”). [N] is displayed when Mode is set to [High
accuracy]/[Device only] while [M] is displayed when
Mode is set to [Battery saving].
Slide the screen up/down or touch the top of the screen to
display/hide function buttons after second line.
2 Detailed information on notifications
You can check the state of the tablet or content of
notifications.
The following operations are available depending on the
type of detailed information.
･ To activate or operate a corresponding app: Touch the
detailed information or the function
･ To switch detailed display/simplified display*: Slide the
detailed information up/down with your two fingers at
the same time or pinch out/in
･ To delete detailed information: Flick the detailed
information to the left/right
･ To set [App notifications]: Touch and hold the detailed
information/[z]
* This operation is available when function buttons after
second line are hidden.
3 Network operator
Connected network operator is displayed.
4 Clear all
When there is a corresponding app, touch it to delete the
detailed information on notifications and notification
icons.
Some detailed information cannot be deleted.
Signal strength
!: Level 4
#: Level 3
$: Level 2
%: Level 1
&: Level 0
(: Outside the service area
): Airplane mode
3G data communication status
0: 3G available
1: Receiving data via 3G
2: Sending data via 3G
3: Sending and receiving data via 3G
GSM data communication status
P: GSM available
Q: Receiving data via GSM
R: Sending data via GSM
S: Sending and receiving data via GSM
LTE data communication status
k: LTE available
m: Receiving data via LTE
n: Sending data via LTE
o: Sending and receiving data via LTE
HSPA data communication status
p: HSPA available
q: Receiving data
via HSPA
r: Sending data via HSPA
s: Sending and receiving data v
ia HSPA
U: International roaming
NFC/Osaifu-Keitai lock status
d: Tablet or docomo nano UIM card locked
e: Tablet and docomo nano UIM card locked
Omakase Lock status
f: Tablet or docomo nano UIM card locked by remote control
g: Tablet and docomo nano UIM card locked by remote control
S: [Reader/Writer, P2P] enabled
Character input mode
!: Hiragana/Kanji
%: Half Alphabet
(: Half Numeric
$: Full Alphabet
&: Full Numeric
): Character Code
,: [Allow only priority interruptions] set
Manner mode status
+: Standard manner
*: Standard manner ([Allow only priority interruptions] set)
-: Silent manner
A: Talking with a speaker
B: Mute set
Wi-Fi signal strength
(: Level 4
): Level 3
*: Level 2
+: Level 1
,: Level 0
The Wi-Fi signal strength icon appears with [6] superimposed
like [5] while you connect to an access point which is not
connected to the Internet.
Simultaneous use of mobile and Wi-Fi networks
g: [Smooth change mode] enabled
h: [Dual Speed mode] enabled
Bluetooth
#: Connection stand-by
$: Connected
6: Measuring location information frequently
Answering memo
P: No answering memo when the answering memo is set
Q: One to nine answering memos when the answering memo is
set
R: 10 answering memos when the answering memo is set
Using the status panel
SH-05G_E.book 26 ページ ２０１５年７月１５日 水曜日 午後１時４５分